Meat Grinder
The Model G0560 comes with a meat grinder. Before assembling this for use, clean and sanitize its parts. See Section 5: Sanitation for details on sanitizing. Figure 28 shows the meat grinder components.
The meat grinder should not be attached to the saw when not in use. Meat fat is required to lubricate the grinder compo- nents during operation. Grinder will be damaged if allowed to turn “dry”.
Figure 28. Meat grinder components.
To install the meat grinder:
1.Disconnect the machine from the power source!
2.Line up the fixed key on the meat grinder to the keyway on the housing shown in Figure 29.
The meat grinder should not be attached to the saw when not in use. The open chute and spinning auger easily invite an accident if not being attended to.
3.Slide the meat grinder all the way into the housing and tighten the split collar to secure the grinder in place.
Keyway
Figure 29. Keyway location.
The meat grinder comes with a sausage stuffer attachment.
To install the sausage stuffer:
1.Remove the collar from the end of the meat grinder housing.
2.Fit the collar over the sausage stuffer.
3.Place the collar back on the housing as shown in Figure 30, and thread it tight so it is secured to the housing.
Sausage
Stuffer
Collar
Figure 30. Sausage stuffer attachment.
|
|
|
|
|
|
|
|
|
|
|
|
G0560 | |||