SECTION 3: SET UP
About this Section
The purpose of this section is to guide you through the required steps to get your machine out of its crate and into operating condition.
This machine presents serious injury hazards to untrained users. Read through this entire man- ual to become familiar with the controls and operations before start- ing the machine!
Wear safety glasses during the entire set up process!
Unpacking
The Model G0503 left our warehouse in a care- fully built crate. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con- dition of your shipment, you should inventory the equipment from the shipping crate.
Piece Inventory
The inventory of the shipping crate includes:
• | Resaw | 1 |
• Bandsaw Blade 168" x 1" x 0.035" | 1 | |
• | Handwheel Handle | 1 |
• | Blade Cover | 1 |
• | Tool Box | 1 |
•Wrench
•Hex Wrench
• | Open End | 1 |
• | 1 | |
• | Phillips Head Screwdriver | 1 |
• | Flat Head Screwdriver | 1 |
• | Pry Tool | 1 |
• | Bolt Bag |
|
| 6 | |
| 6 | |
| 6 | |
| 4 | |
| 4 | |
| 4 |
In the event that any
Figure 5. Piece inventory.
Model G0503 (Mfg. Since 12/08) |