Woodstock W1824 manual Assembly, To assemble the table saw, do these steps

Df[\cN(/)+('?pYi`[KXYc\JXn

Assembly

Assembly consists of installing minor components, the extension wings and table, fence rails, fence, and blade guard.

To assemble the table saw, do these steps:

1.Remove the shipping brace shown in Figure 11, then re-install the fasteners. Save the shipping brace for later machine transport.

2.Thoroughly clean the heavy-duty rust preventative off the gears inside the cabinet and coat them with an appropriate metal protectant (refer to Lubrication on Page 55 for the location of gears).

3.Pull the switch out of the cabinet cavity, then attach the access door by inserting the hinge pins into the hinge sockets shown in Figure 12.

J<KLG

Shipping Brace

Figure 11. Location of the shipping brace.

Access Door

Hinge

Sockets

Figure 12. Access door attached.

4. Install the handles on the handwheels (see Figure 13).

Handle

Figure 13. Handwheel handle installed.

-16-