Woodstock W1824 manual Dado Blades, Laminate Blade Features Figure

Df[\cN(/)+('?pYi`[KXYc\JXn

Laminate Blade Features (Figure 33):

•Best for cutting plywood or veneer

•40-80 teeth

•Triple chip tooth profile

•Very shallow gullet

Thin Kerf Blade: A blade with thinner kerf than a standard blade. Since the spreader/riving knife included with this table saw is sized for standard blades, thin kerf blades cannot be used on this saw unless they meet the Blade Requirements specified in this manual; otherwise, they will increase the risk of kickback.

Dado Blades

Stacked Dado Blade (see Figure 34): Multiple blades are stacked together to control the cutting width. Stacked dado blades are more expensive than wobble blades, but typically produce higher quality results.

Wobble Dado Blade: A single blade mounted at a slight angle on an arbor hub. The blade angle is adjustable on the hub, and the width of the dado cut is controlled by the angle setting of the blade.

FG<I8K@FEJ

Ki`gc\

:_`g

9cX[\

Figure 33. Example of a laminate blade.

Figure 34. Stacked dado blade.

-26-