Troubleshooting

BM 2610021333 01-13_BM 2610021333 01-13.qxp 1/11/13 8:59 AM Page 13

PROBLEM	SYMPTOMS	RESOLUTION

Nailer operates, but no	• Check for a jam.	• Clear a jam.
nail is driven.	• Check function of nail follower.	• Clean and lubricate.
	• Follower springs weakened or damaged?	• Replace follower spring.
	• Check for proper nails.	• Use only recommended nails.
	• Verify tool is loaded.	• Reload tool.

Nail driving action seems	• Check air pressure is in operational range.	• Increase air pressure (Do not exceed 100 psi).
slow or weak.	• Driver blade worn?	• Use pneumatic tool lubricant.
	• Piston O-ring worn or damaged?	• Contact BOSCH for replacement or repair.
	• Bumper worn?	• Replace Bumper.
	• Check recommend hose diameter and length.	• Follow recommendations.
		• Check hose for kinks.

Tool drives nails too	• Check air pressure.	• Reduce air pressure. Min. Operational
deep.	• Check bumper wear.	pressure 60 psi.
		• Replace bumper.

Tool drives nails too	• Check air pressure.	• Increase air pressure. Max. Operational
shallow.	• Check recommend hose diameter and length.	pressure 100 psi.
		• Follow recommendations.
		• Check hose for kinks.

Tool skips nails or has	• Check for proper nails.	• Use only recommended nails.
intermittent feed.	• Check function of magazine per page 7.	• Clean and lubricate.
	• Follower spring weakened or damaged?	• Replace follower spring.
	• Piston O-ring cut or heavily worn?	• Contact BOSCH for replacement.

Nails jam frequently.	• Check for proper nails.	• Use only recommended.

Driven nails are bent or	• Driver blade worn?	• Contact BOSCH for replacement.
not fully driven.

Nails driven properly	• Check inside diameter of air hose.	• Use correct air hose.
during normal operation,	• Check suitability of compressor.	• Use correctly sized compressor for number of
but does not drive fully at		tools used and work rate.
faster nailing speeds.

13.

Troubleshooting

PROBLEM

SYMPTOMS

RESOLUTION