Manual de Instrucciones | Modelo RN1545 |
|
|
Notas
Operating Instructions | Model RN1545 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death and/or property damage! Retain instructions for future reference.
Coil Roofing
TMNailer
BUILT TO LAST
Table Of Contents
General
Specifications . . . . . . . . . . . . . . . .2
Contact Trip Safety Mechanism . .3
Operating The
Troubleshooting . . . . . . . . . . . . . .6
Warranty . . . . . . . . . . . . . . . . . . . .7
Description
This nailer is designed for roofing (asphalt and fiberglass shingles), reroof- ing, and sheathing installation. Features include: convenient top load- ing magazine which holds up to 120 nails, an adjustable shingle guide, a rubber handle grip, and an adjustable depth of drive mechanism.
General Safety Information
This manual contains safety, opera- tional and maintenance information.
Read this manual and understand all safety warn-
ings and instructions
before operating the nail- MANUAL er. Contact your Campbell Hausfeld representative if
you have any questions.
OPERATOR’S RESPONSIBILITY:
Before operating the nailer, read and understand all safety warnings and labels. Follow the operating instruc- tions outlined in this manual.
EMPLOYER’S RESPONSIBILITY:
Distribute this instruction manual to all users before allowing use of the nailer. Ensure all operators read, understand and follow all safety warnings, labels and instructions outlined in this manual.
Danger indicates an imminently
hazardous situation which, if not avoided, WILL result in death or seri- ous injury.
●Do not use any type of flammable gases or oxygen as a power source
for the nailer. Use fil-
tered, lubricated, regu- lated compressed air
only. Use of a com- pressed gas instead of compressed air may
cause the nailer to explode which will cause death or serious personal injury.
●Do not exceed maxi- mum operating pres-
sure of the nailer (115 psi). The nailer will not function properly. Do not use a com-
pressed air source capable of more than 200 psi. The nailer could explode which will cause death or serious personal injury.
●Never use gasoline or
other flammable liq- uids to clean the nail- er. Never use the nail-
er in the presence of
flammable liquids or gases. Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury.
●Always remain in a
firmly balanced position when using or handling the nailer.
●Do not modify or disable the Work Contact Element
(WCE). Do not tie or tape the WCE or trigger in a
depressed position. Death or serious personal injury could result.
●Do not touch the trigger unless dri- ving nails. Never attach air line to nailer or carry nail- er while touching the trigger. The
tool could eject a fastener which will result in death or serious personal injury.
Model RN1545 |
DAILY |
OIL |
Locate model and serial number on tool magazine and cap and record below:
Model No. ________________________
Serial No. _________________________
Retain these numbers for
future reference.
Warning indicates a potentially
hazardous situation which, if not avoided, COULD result in death or serious injury.
● Always disconnect nailer from
air line before
clearing jams, adjusting or servicing the nailer, relocating the nailer, or when the nailer is not in use. Always reconnect the air line BEFORE loading any fasteners. The nailer could eject a fastener causing death or serious personal injury.
●Protect your eyes and ears. Wear Z87 safety glasses, with side shields. Wear hearing protection. Employers
and users are responsible for ensur- ing the user or anyone near the nailer wears this safety protection. Serious eye injury or permanent hearing loss could result.
Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National | IN264200AV 4/98 |
Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA |
|
© 1998 Campbell Hausfeld |
|