Sears 919.727121 Risk from Flying Objects, Risk to Breathing, Risk of Electrical Shock

Page 4

HAZARD

RISK FROM FLYING OBJECTS

WHAT CAN HAPPEN

HOW TO PREVENT IT

THE COMPRESSED AIR STREAM CAN CAUSE SOFT TISSUE

ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES WITH

DAMAGE TO EXPOSED SKIN AND CAN PROPEL DIRT, CHIPS,

SIDE SHIELDS WHEN USING THE COMPRESSOR.

LOOSE PARTICLES AND SMALL OBJECTS AT HIGH SPEED,

NEVER POINT ANY NOZZLE OR SPRAYER TOWARD ANY PART

RESULTING IN PROPERTY DAMAGE OR PERSONAL INJURY.

OF THE BODY OR AT OTHER PEOPLE OR ANIMALS.

 

 

ALWAYS TURN THE COMPRESSOR OFF AND BLEED PRESSURE

 

FROM THE AIR HOSE AND TANK BEFORE ATTEMPTING MAINTE-

 

NANCE, ATTACHING TOOLS OR ACCESSORIES.

 

 

RISK TO BREATHING

 

WHAT CAN HAPPEN

HOW TO PREVENT IT

 

THE COMPRESSED AIR FROM YOUR COMPRESSOR IS NOT

ALWAYS OPERATE AIR COMPRESSOR OUTSIDE IN A CLEAN,

SAFE FOR BREATHING! THE AIR STREAM MAY CONTAIN

WELL VENTILATED AREA. AVOID ENCLOSED AREAS SUCH AS

CARBON MONOXIDE, TOXIC VAPORS OR SOLID PARTICLES

GARAGES, BASEMENTS, STORAGE SHEDS, WHICH LACK A

FROM THE TANK.

STEADY EXCHANGE OF AIR. KEEP CHILDREN, PETS AND OTHERS

 

 

AWAY FROM AREA OF OPERATION.

 

 

NEVER INHALE AIR FROM THE COMPRESSOR EITHER DI-

 

 

RECTLY OR FROM A BREATHING DEVICE CONNECTED TO THE

 

 

COMPRESSOR.

SPRAYED MATERIALS SUCH AS PAINT, PAINT SOLVENTS, PAINT

WORK IN AN AREA WITH GOOD CROSS-VENTILATION. READ

REMOVER, INSECTICIDES, WEED KILLERS, CONTAIN HARMFUL

AND FOLLOW THE SAFETY INSTRUCTIONS PROVIDED ON THE

VAPORS AND POISONS.

LABEL OR SAFETY DATA SHEETS FOR THE MATERIAL YOU ARE

 

 

SPRAYING. USE A NIOSH/MSHA APPROVED RESPIRATOR

 

 

DESIGNED FOR USE WITH YOUR SPECIFIC APPLICATION.

 

 

 

 

RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN

HOW TO PREVENT IT

YOUR AIR COMPRESSOR IS POWERED BY ELECTRICITY. LIKE

NEVER OPERATE THE COMPRESSOR OUTDOORS WHEN IT IS

ANY OTHER ELECTRICALLY POWERED DEVICE, IF IT IS NOT

RAINING OR IN WET CONDITIONS.

USED PROPERLY IT MAY CAUSE ELECTRIC SHOCK.

NEVER OPERATE COMPRESSOR WITH COVER COMPONENTS

 

 

REMOVED OR DAMAGED.

REPAIRS ATTEMPTED BY UNQUALIFIED PERSONNEL CAN

ANY ELECTRICAL WIRING OR REPAIRS REQUIRED ON THIS

RESULT IN SERIOUS INJURY OR DEATH BY ELECTROCUTION.

PRODUCT SHOULD BE PERFORMED BY AUTHORIZED SERVICE

 

CENTER PERSONNEL IN ACCORDANCE WITH NATIONAL AND

 

LOCAL ELECTRICAL CODES.

ELECTRICAL GROUNDING: FAILURE TO PROVIDE ADEQUATE

MAKE CERTAIN THAT THE ELECTRICAL CIRCUIT TO WHICH

GROUNDING TO THIS PRODUCT COULD RESULT IN SERIOUS

THE COMPRESSOR IS CONNECTED PROVIDES PROPER

INJURY OR DEATH FROM ELECTROCUTION. SEE GROUNDING

ELECTRICAL GROUNDING, CORRECT VOLTAGE AND AD-

INSTRUCTIONS.

EQUATE FUSE PROTECTION.

 

 

D20414 Rev. 0 2/15/00

4 — ENG

Image 4
Contents Model No Table of Contents Safety Guidelines DefinitionsImportant Safety Instructions HazardRisk of Explosion or Fire Risk of BurstingRisk to Breathing Risk from Flying ObjectsRisk of Electrical Shock Risk of Property Damage When Transporting Compressor Risk from Moving PartsRisk of Burns Risk of FallingGeneral Information Specification ChartGlossary Tools Needed for Assembly Description of OperationAssembly Installation and BREAK-IN ProceduresGrounding Instructions Operating Procedures When you are finishedMaintenance Check Valve Replacement Safety Valve InspectionTroubleshooting Guide Problem Cause CorrectionTroubleshooting Guide Permanently Lubricated Tank Mounted AIR Compressor Modèle no Table DES Matières Garantie Complète DE UN AN SUR LES Compresseurs D’AIRRisque D’EXPLOSION OU D’INCENDIE Risque D’ÉCLATEMENTRisque PAR Inhalation Risque DE Projection D’OBJETSRisque DE Choc Électrique Risque DE Brûlures Risque Relié AUX Pièces MobilesRisque DE Chute Lexique Renseignements GénérauxTableau DES Spécifications Description DU Mode Opérationnel Outils Requis À L’INSTALLATIONInstallation ET Procédures DE Mise EN Route AssemblageDirectives DE Mise a LA Terre Procédures de mise en routeProcédures Opérationnelles Une fois que vous avez terminéSoupape de retenue Remplacement EntretienGuide DE DÉ Pannage Problème Cause CorrectionAccuse toujours une fuite, remplacez-la Modèle no