Husqvarna 966648206 manuel dutilisation Cutting equipment, General rules, Guide bar, Saw chain

Page 12

GENERAL SAFETY PRECAUTIONS

WARNING! Never use a saw without a

! muffler, or with a damaged muffler. A damaged muffler may substantially increase the noise level and the fire hazard. Keep fire fighting equipment handy. If a spark arrestor screen is required in your area, never use the saw without or with a broken spark arrestor screen.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of kickback.

•Reduce the risk of the saw chain breaking or jumping off the bar.

•Obtain optimal cutting performance.

•Extend the life of cutting equipment.

•Avoid increasing vibration levels.

General rules

•Only use cutting equipment recommended by us! See instructions under the heading Technical data.

•Keep the chain’s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. A damaged or badly sharpened chain increases the risk of accidents.

•Maintain the correct depth gauge setting! Follow our instructions and use the recommended depth gauge clearance. Too large a clearance increases the risk of kickback.

•Keep the chain properly tensioned! If the chain is slack it is more likely to jump off and lead to increased wear on the bar, chain and drive sprocket.

•Keep cutting equipment well lubricated and properly maintained! A poorly lubricated chain is more likely to break and lead to increased wear on the bar, chain and drive sprocket.

Cutting equipment designed to reduce kickback

WARNING! Faulty cutting equipment or

! the wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

The only way to avoid kickback is to make sure that the kickback zone of the bar never touches anything.

By using cutting equipment with ”built-in” kickback reduction and keeping the chain sharp and well- maintained you can reduce the effects of kickback.

Guide bar

The smaller the tip radius the lower the chance of kickback.

Saw chain

A chain is made up of a number of links, which are available in standard and low-kickback versions.

IMPORTANT! No saw chain design eliminates the danger of kickback.

WARNING! Any contact with a rotating

! saw chain can cause extremely serious injuries.

Some terms that describe the bar and chain

To maintain the safety features of the cutting equipment, you should replace a worn or damaged bar or chain with a bar and chain combinations recommended by Husqvarna. See instructions under the heading Technical Data for a list of replacement bar and chain combinations we recommend.

Guide bar

•Length (inches/cm)

•Number of teeth on bar tip sprocket (T).

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operator′s manual Manuel d’utilisation KEY to Symbols Symbols on the machineDecompression valve Press Symbols in the operator’s manual EPAContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawAlways use common sense Personal protective equipmentCarbon monoxide poisoning Machine′s safety equipment Chain brake and front hand guardThrottle lockout Stop switch Chain catcherRight hand guard Vibration damping systemCutting equipment General rulesCutting equipment designed to reduce kickback Guide barSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethGeneral advice on adjusting depth gauge setting Increased if the depth gauge setting isAdjustment of depth gauge setting Sharpening cutting teethTensioning the chain Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment General Safety Precautions Assembly Fitting the bar and chainWorking with the chain Fuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingStarting Cold engineStopping Basic safety rules Working TechniquesBefore use General working instructionsWorking Techniques Basic cutting technique Tree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreat Felling cutFelling Training we advise you not to fell trees Your sawGeneral advice Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Maintenance Carburetor adjustmentGeneral Checking the inertia brake release Checking the brake triggerMuffler Starter Changing a broken or worn starter cordTensioning the recoil spring Air filter Spark plugChanging a broken recoil spring Fitting the starterAdjustment of the oil pump Running when making adjustmentsLubricating the bar tip sprocket Needle bearing lubricationAir Injection centrifugal cleaning Temperature 0C 32F or colderWinter use Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain filing and file gauges Recommended cutting equipment for Canada050/1,3 mm 058/1,5 mmFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsEmission Control Warranty Parts List American Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautionsExplication DES Symboles Symboles sur la machineDécompresseur Le Symboles dans le manuel Sommaire SommaireConsignes de sécurité pour les utilisateurs de Cher client Quels Sont LES COMPOSANTS? Quels sont les composants de la tronçonneuse?Instructions Générales DE Sécurité AVERTISSEMENT! Ne jamais modifierUtilisez toujours votre bon sens Équipement de protection personnelleÉquipement de sécurité de la machine Frein de chaîne avec arceau protecteurInstructions Générales DE Sécurité Blocage de l’accélération Capteur de chaîneProtection de la main droite Système anti-vibrationsÉquipement de coupe SilencieuxRègles élémentaires Équipement de coupe anti-rebondAffûtage et réglage de l’épaisseur du copeau de la chaîne ChaîneGénéralités concernant l’affûtage des dents AVERTISSEMENT! La tendance au RespectéesAffûtage de la dent Généralités sur le réglage de l’épaisseur du copeauTension de la chaîne Lubrification de l’équipement de coupeRéglage de l’épaisseur du copeau Remplissage d’huile de chaîne Contrôle de la lubrification de la chaînePignon d’entraînement Graissage du roulement à aiguillesContrôle de l’usure de l’équipement de coupe Montage Montage du guide-chaîne et de la chaîneAVERTISSEMENT! Utiliser des gants Manipulation DU Carburant CarburantRemplissage de carburant Sécurité carburantTransport et rangement Remisage prolongéDémarrage ET Arrêt Démarrage et arrêtDémarrage AVERTISSEMENT! Contrôler les pointsProlongée des gaz d’échappement du De la poussière de copeaux peutConstituer un danger pour la santé Techniques DE Travail Avant chaque utilisationMéthodes de travail Règles élémentaires de sécuritéRègles élémentaires Technique de base pour la coupe AVERTISSEMENT! N’utilisez jamais uneGénéralités TerminologieTechniques d’abattage Sens d’abattage Émondage des branches basses et voie de retraiteAbattage AVERTISSEMENT! Il est déconseillé aux EncocheSolution à un abattage raté Trait de chuteRécupération d’un arbre accroché Mesures anti-rebond Qu’est-ce qu’un rebond?Sciage d’un arbre ou d’une branche pliés Règles généralesTronçonnage en rondins Entretien GénéralitésRéglage du carburateur FonctionnementContrôle de la fonction d’inertie Contrôle de l’effet de freinageSilencieux Remplacement d’une corde de lanceur rompue ou usée LanceurRemplacement d’un ressort de rappel rompu Filtre à airMise sous tension du ressort Montage du lanceurBougie Graissage du pignon d’entraînement du guideGraissage du roulement à aiguilles Réglage de la pompe à huileSystème de refroidissement Épuration centrifuge Air InjectionUtilisation hivernale Température inférieure ou égale à 0CPoignées chauffantes Chauffage électrique du carburateurSchéma d’entretien Entretien quotidien Entretien hebdomadaire Entretien mensuelCaractéristiques Techniques Caractéristiques techniquesÉquipement de coupe recommandé pour Canada Affûtage de la chaîne et gabarits d’affûtageDéclaration DE Garantie Pour LA Lutte Contre LES VOS Droits ET Obligations EN GarantieService APRÈS-VENTE Précautions Sécuritaires Conformant AUX Normes Précautions à prendre pour se protéger des rebondsAutres consignes de sécurité Précautions Sécuritaires Conformant AUX Normes Page Page Page Page Page Original instructions Instructions d’origine 1154131-32

966648206 specifications

The Husqvarna 966648206 is a reliable and innovative garden tractor designed for homeowners who seek efficiency and convenience for their lawn care needs. This model stands out due to its powerful performance, user-friendly features, and advanced technology, making it an excellent choice for those looking to maintain their lawns effortlessly.

At the heart of the Husqvarna 966648206 is a robust engine that delivers exceptional power and torque. This ensures that the tractor can tackle a variety of tasks, from mowing to transporting materials, with ease. The engine is designed for fuel efficiency, allowing users to spend more time working and less time refueling, which is a significant plus for those managing larger properties.

The design of the Husqvarna 966648206 is user-oriented, featuring an ergonomic seat and an adjustable steering wheel to enhance comfort during extended use. The intuitive dashboard provides easy access to controls, allowing the user to adjust settings quickly while keeping their focus on the task at hand. This tractor's hydrostatic transmission lends itself to smooth and seamless operation, enabling seamless speed adjustments without the need for complex gear shifting.

One of the notable features of the Husqvarna 966648206 is its cutting deck, which is engineered for optimal grass cutting performance. The durable deck construction ensures longevity, while its design allows for superior airflow and cut quality, ensuring a clean and even cut every time. The cutting height is easily adjustable, accommodating different grass lengths and preferences.

In terms of technology, the Husqvarna 966648206 is equipped with features like a smart and efficient mower energy management system that optimizes the cutting process for performance and battery longevity. Additionally, the tractor's compatibility with various accessories, such as mulchers and baggers, adds to its versatility, allowing homeowners to customize their lawn care experience.

Safety is also a priority in the design of the Husqvarna 966648206. With features such as an automatic blade brake system and a reliable parking brake, users can rest assured that they are using a machine designed with their safety in mind.

Overall, the Husqvarna 966648206 is a feature-rich garden tractor that combines power, comfort, and advanced technology to meet the needs of any homeowner. Its thoughtful design and reliable performance make lawn maintenance a more enjoyable and efficient experience. Whether tackling a small garden or a larger lawn, this tractor is up to the task, providing excellent value and results for every gardening enthusiast.
Top Page Image Contents