Husqvarna 966648206 manuel dutilisation Maintenance schedule

Page 37

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain

 

brake for wear. Replace when less

Clean the outside of the machine.

converter, check the cooling system

than 0.6 mm (0,024 inch) remains at

 

weekly.

 

the most worn point.

 

 

 

 

 

Check that the components of the

Check the starter, starter cord and

Check the clutch centre, clutch drum

throttle control work safely. (Throttle

return spring.

and clutch spring for wear.

lockout and throttle control.)

 

 

 

 

 

Clean the chain brake and check that

 

 

it operates safely. Make sure that the

Check that the vibration damping

Clean the spark plug. Check that the

chain catcher is undamaged, and

elements are not damaged.

electrode gap is 0,5 mm (0.020 inch).

replace it if necessary.

 

 

 

 

 

The bar should be turned daily for

 

 

more even wear. Check the

 

 

lubrication hole in the bar, to be sure it

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

is not clogged. Clean the bar groove.

 

 

If the bar has a sprocket tip, this

 

 

should be lubricated.

 

 

 

 

 

Check that the bar and chain are

File off any burrs from the edges of

Check fuel hose for cracks or other

getting sufficient oil.

the bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to

 

 

visible cracks in the rivets and links,

 

 

whether the saw chain is stiff or

Clean or replace the spark arrestor

Empty the fuel tank and clean the

whether the rivets and links are

screen on the muffler.

inside.

abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its

 

 

tension and condition. Check the drive

Clean the carburetor compartment.

Empty the oil tank and clean the

sprocket for excessive wear and

inside.

 

replace if necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if

Check all cables and connections.

necessary.

 

 

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks

 

 

from the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic

 

 

converter, check the cooling system

 

 

daily.

 

 

 

 

 

English – 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Operator′s manual Manuel d’utilisation Symbols on the machine KEY to SymbolsDecompression valve Press EPA Symbols in the operator’s manualContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsPersonal protective equipment Always use common senseCarbon monoxide poisoning Chain brake and front hand guard Machine′s safety equipmentThrottle lockout Chain catcher Stop switchRight hand guard Vibration damping systemGeneral rules Cutting equipmentCutting equipment designed to reduce kickback Guide barGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingIncreased if the depth gauge setting is General advice on adjusting depth gauge settingAdjustment of depth gauge setting Sharpening cutting teethLubricating cutting equipment Tensioning the chainFilling with chain oil Checking chain lubricationNeedle bearing lubrication Chain drive sprocketChecking wear on cutting equipment General Safety Precautions Fitting the bar and chain AssemblyWorking with the chain Fuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingStarting Cold engineStopping Working Techniques Basic safety rulesBefore use General working instructionsWorking Techniques Basic cutting technique Safe distance Tree felling techniqueFelling direction Felling cut Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Your sawFreeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCarburetor adjustment MaintenanceGeneral Checking the brake trigger Checking the inertia brake releaseMuffler Changing a broken or worn starter cord StarterTensioning the recoil spring Spark plug Air filterChanging a broken recoil spring Fitting the starterRunning when making adjustments Adjustment of the oil pumpLubricating the bar tip sprocket Needle bearing lubricationTemperature 0C 32F or colder Air Injection centrifugal cleaningWinter use Heated handlesDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataRecommended cutting equipment for Canada Saw chain filing and file gauges050/1,3 mm 058/1,5 mmYour Warranty Rights and Obligations Federal Emission Control Warranty StatementEmission Control Warranty Parts List Safety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsSymboles sur la machine Explication DES SymbolesDécompresseur Le Symboles dans le manuel Sommaire SommaireConsignes de sécurité pour les utilisateurs de Cher client Quels sont les composants de la tronçonneuse? Quels Sont LES COMPOSANTS?AVERTISSEMENT! Ne jamais modifier Instructions Générales DE SécuritéÉquipement de protection personnelle Utilisez toujours votre bon sensFrein de chaîne avec arceau protecteur Équipement de sécurité de la machineInstructions Générales DE Sécurité Capteur de chaîne Blocage de l’accélérationProtection de la main droite Système anti-vibrationsSilencieux Équipement de coupeRègles élémentaires Équipement de coupe anti-rebondChaîne Affûtage et réglage de l’épaisseur du copeau de la chaîneGénéralités concernant l’affûtage des dents Respectées AVERTISSEMENT! La tendance auAffûtage de la dent Généralités sur le réglage de l’épaisseur du copeauLubrification de l’équipement de coupe Tension de la chaîneRéglage de l’épaisseur du copeau Contrôle de la lubrification de la chaîne Remplissage d’huile de chaînePignon d’entraînement Graissage du roulement à aiguillesContrôle de l’usure de l’équipement de coupe Montage du guide-chaîne et de la chaîne MontageAVERTISSEMENT! Utiliser des gants Carburant Manipulation DU CarburantSécurité carburant Remplissage de carburantTransport et rangement Remisage prolongéDémarrage et arrêt Démarrage ET ArrêtDémarrage AVERTISSEMENT! Contrôler les pointsDe la poussière de copeaux peut Prolongée des gaz d’échappement duConstituer un danger pour la santé Avant chaque utilisation Techniques DE TravailMéthodes de travail Règles élémentaires de sécuritéRègles élémentaires AVERTISSEMENT! N’utilisez jamais une Technique de base pour la coupeGénéralités TerminologieTechniques d’abattage Émondage des branches basses et voie de retraite Sens d’abattageAbattage AVERTISSEMENT! Il est déconseillé aux EncocheTrait de chute Solution à un abattage ratéRécupération d’un arbre accroché Qu’est-ce qu’un rebond? Mesures anti-rebondSciage d’un arbre ou d’une branche pliés Règles généralesTronçonnage en rondins Généralités EntretienRéglage du carburateur FonctionnementContrôle de l’effet de freinage Contrôle de la fonction d’inertieSilencieux Lanceur Remplacement d’une corde de lanceur rompue ou uséeFiltre à air Remplacement d’un ressort de rappel rompuMise sous tension du ressort Montage du lanceurGraissage du pignon d’entraînement du guide BougieGraissage du roulement à aiguilles Réglage de la pompe à huileÉpuration centrifuge Air Injection Système de refroidissementUtilisation hivernale Température inférieure ou égale à 0CChauffage électrique du carburateur Poignées chauffantesEntretien quotidien Entretien hebdomadaire Entretien mensuel Schéma d’entretienCaractéristiques techniques Caractéristiques TechniquesAffûtage de la chaîne et gabarits d’affûtage Équipement de coupe recommandé pour CanadaVOS Droits ET Obligations EN Garantie Déclaration DE Garantie Pour LA Lutte Contre LESService APRÈS-VENTE Précautions à prendre pour se protéger des rebonds Précautions Sécuritaires Conformant AUX NormesAutres consignes de sécurité Précautions Sécuritaires Conformant AUX Normes Page Page Page Page Page Original instructions Instructions d’origine 1154131-32

966648206 specifications

The Husqvarna 966648206 is a reliable and innovative garden tractor designed for homeowners who seek efficiency and convenience for their lawn care needs. This model stands out due to its powerful performance, user-friendly features, and advanced technology, making it an excellent choice for those looking to maintain their lawns effortlessly.

At the heart of the Husqvarna 966648206 is a robust engine that delivers exceptional power and torque. This ensures that the tractor can tackle a variety of tasks, from mowing to transporting materials, with ease. The engine is designed for fuel efficiency, allowing users to spend more time working and less time refueling, which is a significant plus for those managing larger properties.

The design of the Husqvarna 966648206 is user-oriented, featuring an ergonomic seat and an adjustable steering wheel to enhance comfort during extended use. The intuitive dashboard provides easy access to controls, allowing the user to adjust settings quickly while keeping their focus on the task at hand. This tractor's hydrostatic transmission lends itself to smooth and seamless operation, enabling seamless speed adjustments without the need for complex gear shifting.

One of the notable features of the Husqvarna 966648206 is its cutting deck, which is engineered for optimal grass cutting performance. The durable deck construction ensures longevity, while its design allows for superior airflow and cut quality, ensuring a clean and even cut every time. The cutting height is easily adjustable, accommodating different grass lengths and preferences.

In terms of technology, the Husqvarna 966648206 is equipped with features like a smart and efficient mower energy management system that optimizes the cutting process for performance and battery longevity. Additionally, the tractor's compatibility with various accessories, such as mulchers and baggers, adds to its versatility, allowing homeowners to customize their lawn care experience.

Safety is also a priority in the design of the Husqvarna 966648206. With features such as an automatic blade brake system and a reliable parking brake, users can rest assured that they are using a machine designed with their safety in mind.

Overall, the Husqvarna 966648206 is a feature-rich garden tractor that combines power, comfort, and advanced technology to meet the needs of any homeowner. Its thoughtful design and reliable performance make lawn maintenance a more enjoyable and efficient experience. Whether tackling a small garden or a larger lawn, this tractor is up to the task, providing excellent value and results for every gardening enthusiast.
Top Page Image Contents