Husqvarna 966648206 manuel dutilisation Basic cutting technique

Page 25

WORKING TECHNIQUES

chain use only combinations that are recommended by us. See instructions under the headings Cutting equipment and Technical data.

Basic cutting technique

!

WARNING! Never use a chain saw by

holding it with one hand. A chain saw is

 

 

not safely controlled with one hand.

 

Always have a secure, firm grip around

 

the handles with both hands.

General

•Always use full throttle when cutting!

•Reduce the speed to idle after every cut (running the engine for too long at full throttle without any load, i.e. without any resistance from the chain during cutting, can lead to serious engine damage).

•Cutting from above = Cutting with a pulling chain.

•Cutting from below = Cutting with a pushing chain.

Cutting with a pushing chain increases the risk of kickback. See instructions under the heading How to avoid kickback.

Terms

Cutting = General term for cutting through wood.

Limbing = Cutting branches off a felled tree.

Splitting = When the object you are cutting breaks off before the cut is complete.

There are five important factors you should consider before making a cut:

1Make sure the cutting equipment will not jam in the cut.

2 Make sure the object you are cutting will not split.

3Make sure the chain will not strike the ground or any other object during or after cutting.

4 Is there a risk of kickback?

5Do the conditions and surrounding terrain affect how safely you can stand and move about?

Two factors decide whether the chain will jam or the object that you are cutting will split: the first is how the object is supported before and after cutting, and the second is whether it is in tension.

In most cases you can avoid these problems by cutting in two stages; from the top and from the bottom.You need to support the object so that it will not trap the chain or split during cutting.

IMPORTANT! If the chain jams in the cut: stop the engine! Don’t try to pull the chain saw free. If you do you may be injured by the chain when the chain saw suddenly breaks free. Use a lever to open up the cut and free the chain saw.

The following instructions describe how to handle the common situations you are likely to encounter when using a chain saw.

Limbing

When limbing thick branches you should use the same approach as for cutting.

Cut difficult branches piece by piece.

2

1

3

Cutting

WARNING! Never attempt to cut logs

! while they are in a pile or when a couple of logs are lying together. Such procedures drastically increase the risk of kickback which can result in a serious or fatal injury.

If you have a pile of logs, each log you attempt to cut should be removed from the pile, placed on a saw horse or runners and cut individually.

Remove the cut pieces from the cutting area. By leaving them in the cutting area, you increase the risk for

English – 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Operator′s manual Manuel d’utilisation Symbols on the machine KEY to SymbolsDecompression valve Press EPA Symbols in the operator’s manualContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsPersonal protective equipment Always use common senseCarbon monoxide poisoning Chain brake and front hand guard Machine′s safety equipmentThrottle lockout Chain catcher Stop switchRight hand guard Vibration damping systemGeneral rules Cutting equipmentCutting equipment designed to reduce kickback Guide barGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingIncreased if the depth gauge setting is General advice on adjusting depth gauge settingAdjustment of depth gauge setting Sharpening cutting teethLubricating cutting equipment Tensioning the chainFilling with chain oil Checking chain lubricationNeedle bearing lubrication Chain drive sprocketChecking wear on cutting equipment General Safety Precautions Fitting the bar and chain AssemblyWorking with the chain Fuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingStarting Cold engineStopping Working Techniques Basic safety rulesBefore use General working instructionsWorking Techniques Basic cutting technique Safe distance Tree felling techniqueFelling direction Felling cut Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Your sawFreeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCarburetor adjustment MaintenanceGeneral Checking the brake trigger Checking the inertia brake releaseMuffler Changing a broken or worn starter cord StarterTensioning the recoil spring Spark plug Air filterChanging a broken recoil spring Fitting the starterRunning when making adjustments Adjustment of the oil pumpLubricating the bar tip sprocket Needle bearing lubricationTemperature 0C 32F or colder Air Injection centrifugal cleaningWinter use Heated handlesDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataRecommended cutting equipment for Canada Saw chain filing and file gauges050/1,3 mm 058/1,5 mmYour Warranty Rights and Obligations Federal Emission Control Warranty StatementEmission Control Warranty Parts List Safety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsSymboles sur la machine Explication DES SymbolesDécompresseur Le Symboles dans le manuel Sommaire SommaireConsignes de sécurité pour les utilisateurs de Cher client Quels sont les composants de la tronçonneuse? Quels Sont LES COMPOSANTS?AVERTISSEMENT! Ne jamais modifier Instructions Générales DE SécuritéÉquipement de protection personnelle Utilisez toujours votre bon sensFrein de chaîne avec arceau protecteur Équipement de sécurité de la machineInstructions Générales DE Sécurité Capteur de chaîne Blocage de l’accélérationProtection de la main droite Système anti-vibrationsSilencieux Équipement de coupeRègles élémentaires Équipement de coupe anti-rebondChaîne Affûtage et réglage de l’épaisseur du copeau de la chaîneGénéralités concernant l’affûtage des dents Respectées AVERTISSEMENT! La tendance auAffûtage de la dent Généralités sur le réglage de l’épaisseur du copeauLubrification de l’équipement de coupe Tension de la chaîneRéglage de l’épaisseur du copeau Contrôle de la lubrification de la chaîne Remplissage d’huile de chaînePignon d’entraînement Graissage du roulement à aiguillesContrôle de l’usure de l’équipement de coupe Montage du guide-chaîne et de la chaîne MontageAVERTISSEMENT! Utiliser des gants Carburant Manipulation DU CarburantSécurité carburant Remplissage de carburantTransport et rangement Remisage prolongéDémarrage et arrêt Démarrage ET ArrêtDémarrage AVERTISSEMENT! Contrôler les pointsDe la poussière de copeaux peut Prolongée des gaz d’échappement duConstituer un danger pour la santé Avant chaque utilisation Techniques DE TravailMéthodes de travail Règles élémentaires de sécuritéRègles élémentaires AVERTISSEMENT! N’utilisez jamais une Technique de base pour la coupeGénéralités TerminologieTechniques d’abattage Émondage des branches basses et voie de retraite Sens d’abattageAbattage AVERTISSEMENT! Il est déconseillé aux EncocheTrait de chute Solution à un abattage ratéRécupération d’un arbre accroché Qu’est-ce qu’un rebond? Mesures anti-rebondSciage d’un arbre ou d’une branche pliés Règles généralesTronçonnage en rondins Généralités EntretienRéglage du carburateur FonctionnementContrôle de l’effet de freinage Contrôle de la fonction d’inertieSilencieux Lanceur Remplacement d’une corde de lanceur rompue ou uséeFiltre à air Remplacement d’un ressort de rappel rompuMise sous tension du ressort Montage du lanceurGraissage du pignon d’entraînement du guide BougieGraissage du roulement à aiguilles Réglage de la pompe à huileÉpuration centrifuge Air Injection Système de refroidissementUtilisation hivernale Température inférieure ou égale à 0CChauffage électrique du carburateur Poignées chauffantesEntretien quotidien Entretien hebdomadaire Entretien mensuel Schéma d’entretienCaractéristiques techniques Caractéristiques TechniquesAffûtage de la chaîne et gabarits d’affûtage Équipement de coupe recommandé pour CanadaVOS Droits ET Obligations EN Garantie Déclaration DE Garantie Pour LA Lutte Contre LESService APRÈS-VENTE Précautions à prendre pour se protéger des rebonds Précautions Sécuritaires Conformant AUX NormesAutres consignes de sécurité Précautions Sécuritaires Conformant AUX Normes Page Page Page Page Page Original instructions Instructions d’origine 1154131-32

966648206 specifications

The Husqvarna 966648206 is a reliable and innovative garden tractor designed for homeowners who seek efficiency and convenience for their lawn care needs. This model stands out due to its powerful performance, user-friendly features, and advanced technology, making it an excellent choice for those looking to maintain their lawns effortlessly.

At the heart of the Husqvarna 966648206 is a robust engine that delivers exceptional power and torque. This ensures that the tractor can tackle a variety of tasks, from mowing to transporting materials, with ease. The engine is designed for fuel efficiency, allowing users to spend more time working and less time refueling, which is a significant plus for those managing larger properties.

The design of the Husqvarna 966648206 is user-oriented, featuring an ergonomic seat and an adjustable steering wheel to enhance comfort during extended use. The intuitive dashboard provides easy access to controls, allowing the user to adjust settings quickly while keeping their focus on the task at hand. This tractor's hydrostatic transmission lends itself to smooth and seamless operation, enabling seamless speed adjustments without the need for complex gear shifting.

One of the notable features of the Husqvarna 966648206 is its cutting deck, which is engineered for optimal grass cutting performance. The durable deck construction ensures longevity, while its design allows for superior airflow and cut quality, ensuring a clean and even cut every time. The cutting height is easily adjustable, accommodating different grass lengths and preferences.

In terms of technology, the Husqvarna 966648206 is equipped with features like a smart and efficient mower energy management system that optimizes the cutting process for performance and battery longevity. Additionally, the tractor's compatibility with various accessories, such as mulchers and baggers, adds to its versatility, allowing homeowners to customize their lawn care experience.

Safety is also a priority in the design of the Husqvarna 966648206. With features such as an automatic blade brake system and a reliable parking brake, users can rest assured that they are using a machine designed with their safety in mind.

Overall, the Husqvarna 966648206 is a feature-rich garden tractor that combines power, comfort, and advanced technology to meet the needs of any homeowner. Its thoughtful design and reliable performance make lawn maintenance a more enjoyable and efficient experience. Whether tackling a small garden or a larger lawn, this tractor is up to the task, providing excellent value and results for every gardening enthusiast.
Top Page Image Contents