Husqvarna 966648206 Fueling, Fuel safety, Transport and storage, Long-term storage

Page 20

FUEL HANDLING

Fueling

!

WARNING! Taking the following

precautions, will lessen the risk of fire:

 

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling.The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly

! flammable. Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

Fuel safety

Never refuel the machine while the engine is running.

Make sure there is plenty of ventilation when refuelling or mixing fuel (petrol and 2-stroke oil).

Move the machine at least 3 m from the refuelling point before starting it.

Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with

! visible damage to the spark plug guard and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

Always store fuel in an approved container designed for that purpose.

For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local petrol station.

The guide bar cover must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

Remove the spark plug cap from the spark plug. Activate the chain brake.

Secure the machine during transport.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the guide bar cover. Clean the machine. See instructions under the heading Maintenance schedule.

Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

20 – English

Image 20
Contents Operator′s manual Manuel d’utilisation Decompression valve Press KEY to SymbolsSymbols on the machine Symbols in the operator’s manual EPAContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawCarbon monoxide poisoning Always use common sensePersonal protective equipment Machine′s safety equipment Chain brake and front hand guardThrottle lockout Stop switch Chain catcherRight hand guard Vibration damping systemCutting equipment General rulesCutting equipment designed to reduce kickback Guide barSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethGeneral advice on adjusting depth gauge setting Increased if the depth gauge setting isAdjustment of depth gauge setting Sharpening cutting teethTensioning the chain Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication General Safety Precautions Working with the chain AssemblyFitting the bar and chain Fuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingStarting Cold engineStopping Basic safety rules Working TechniquesBefore use General working instructionsWorking Techniques Basic cutting technique Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreat Felling cutFelling Training we advise you not to fell trees Your sawGeneral advice Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?General MaintenanceCarburetor adjustment Checking the inertia brake release Checking the brake triggerMuffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Air filter Spark plugChanging a broken recoil spring Fitting the starterAdjustment of the oil pump Running when making adjustmentsLubricating the bar tip sprocket Needle bearing lubricationAir Injection centrifugal cleaning Temperature 0C 32F or colderWinter use Heated handlesMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataSaw chain filing and file gauges Recommended cutting equipment for Canada050/1,3 mm 058/1,5 mmFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsEmission Control Warranty Parts List American Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautionsDécompresseur Le Explication DES SymbolesSymboles sur la machine Symboles dans le manuel Consignes de sécurité pour les utilisateurs de SommaireSommaire Cher client Quels Sont LES COMPOSANTS? Quels sont les composants de la tronçonneuse?Instructions Générales DE Sécurité AVERTISSEMENT! Ne jamais modifierUtilisez toujours votre bon sens Équipement de protection personnelleÉquipement de sécurité de la machine Frein de chaîne avec arceau protecteurInstructions Générales DE Sécurité Blocage de l’accélération Capteur de chaîneProtection de la main droite Système anti-vibrationsÉquipement de coupe SilencieuxRègles élémentaires Équipement de coupe anti-rebondGénéralités concernant l’affûtage des dents Affûtage et réglage de l’épaisseur du copeau de la chaîneChaîne AVERTISSEMENT! La tendance au RespectéesAffûtage de la dent Généralités sur le réglage de l’épaisseur du copeauRéglage de l’épaisseur du copeau Tension de la chaîneLubrification de l’équipement de coupe Remplissage d’huile de chaîne Contrôle de la lubrification de la chaînePignon d’entraînement Graissage du roulement à aiguillesContrôle de l’usure de l’équipement de coupe AVERTISSEMENT! Utiliser des gants MontageMontage du guide-chaîne et de la chaîne Manipulation DU Carburant CarburantRemplissage de carburant Sécurité carburantTransport et rangement Remisage prolongéDémarrage ET Arrêt Démarrage et arrêtDémarrage AVERTISSEMENT! Contrôler les pointsConstituer un danger pour la santé Prolongée des gaz d’échappement duDe la poussière de copeaux peut Techniques DE Travail Avant chaque utilisationMéthodes de travail Règles élémentaires de sécuritéRègles élémentaires Technique de base pour la coupe AVERTISSEMENT! N’utilisez jamais uneGénéralités TerminologieTechniques d’abattage Sens d’abattage Émondage des branches basses et voie de retraiteAbattage AVERTISSEMENT! Il est déconseillé aux EncocheRécupération d’un arbre accroché Solution à un abattage ratéTrait de chute Mesures anti-rebond Qu’est-ce qu’un rebond?Sciage d’un arbre ou d’une branche pliés Règles généralesTronçonnage en rondins Entretien GénéralitésRéglage du carburateur FonctionnementContrôle de la fonction d’inertie Contrôle de l’effet de freinageSilencieux Remplacement d’une corde de lanceur rompue ou usée LanceurRemplacement d’un ressort de rappel rompu Filtre à airMise sous tension du ressort Montage du lanceurBougie Graissage du pignon d’entraînement du guideGraissage du roulement à aiguilles Réglage de la pompe à huileSystème de refroidissement Épuration centrifuge Air InjectionUtilisation hivernale Température inférieure ou égale à 0CPoignées chauffantes Chauffage électrique du carburateurSchéma d’entretien Entretien quotidien Entretien hebdomadaire Entretien mensuelCaractéristiques Techniques Caractéristiques techniquesÉquipement de coupe recommandé pour Canada Affûtage de la chaîne et gabarits d’affûtageDéclaration DE Garantie Pour LA Lutte Contre LES VOS Droits ET Obligations EN GarantieService APRÈS-VENTE Autres consignes de sécurité Précautions Sécuritaires Conformant AUX NormesPrécautions à prendre pour se protéger des rebonds Précautions Sécuritaires Conformant AUX Normes Page Page Page Page Page Original instructions Instructions d’origine 1154131-32

966648206 specifications

The Husqvarna 966648206 is a reliable and innovative garden tractor designed for homeowners who seek efficiency and convenience for their lawn care needs. This model stands out due to its powerful performance, user-friendly features, and advanced technology, making it an excellent choice for those looking to maintain their lawns effortlessly.

At the heart of the Husqvarna 966648206 is a robust engine that delivers exceptional power and torque. This ensures that the tractor can tackle a variety of tasks, from mowing to transporting materials, with ease. The engine is designed for fuel efficiency, allowing users to spend more time working and less time refueling, which is a significant plus for those managing larger properties.

The design of the Husqvarna 966648206 is user-oriented, featuring an ergonomic seat and an adjustable steering wheel to enhance comfort during extended use. The intuitive dashboard provides easy access to controls, allowing the user to adjust settings quickly while keeping their focus on the task at hand. This tractor's hydrostatic transmission lends itself to smooth and seamless operation, enabling seamless speed adjustments without the need for complex gear shifting.

One of the notable features of the Husqvarna 966648206 is its cutting deck, which is engineered for optimal grass cutting performance. The durable deck construction ensures longevity, while its design allows for superior airflow and cut quality, ensuring a clean and even cut every time. The cutting height is easily adjustable, accommodating different grass lengths and preferences.

In terms of technology, the Husqvarna 966648206 is equipped with features like a smart and efficient mower energy management system that optimizes the cutting process for performance and battery longevity. Additionally, the tractor's compatibility with various accessories, such as mulchers and baggers, adds to its versatility, allowing homeowners to customize their lawn care experience.

Safety is also a priority in the design of the Husqvarna 966648206. With features such as an automatic blade brake system and a reliable parking brake, users can rest assured that they are using a machine designed with their safety in mind.

Overall, the Husqvarna 966648206 is a feature-rich garden tractor that combines power, comfort, and advanced technology to meet the needs of any homeowner. Its thoughtful design and reliable performance make lawn maintenance a more enjoyable and efficient experience. Whether tackling a small garden or a larger lawn, this tractor is up to the task, providing excellent value and results for every gardening enthusiast.