Woodstock M1099 manual FdgfleI\jk, KffcGfjk, Kfj\kk\XelcXigfj`k`fe#fk\j\jk\gj1

Df[\cD('00D]^J`eZ\/&'.

:fdgfle[I\jk

The compound rest is used to cut tapers on parts or to set the proper infeed angle when threading. It may also be used to cut specific lengths longitudinally, when set parallel to the spindle axis.

Kfj\kk_\Xe^lcXigfj`k`fe#[fk_\j\jk\gj1

(% Loosen the hex nuts on each side of the compound rest (see =`^li\),).

)% While watching the scale, rotate the compound rest to the desired angular position.

*% Tighten the two hex nuts. Be sure to not overtight- en, as you may strip threads or crack or distort the base casting.

	Scale
Hex Nut

=`^li\),% Compound rest, scale, and hex

nuts.

KffcGfjk

The four-way tool post (=`^li\)-) is mounted on top of the compound rest and allows a maximum of four 3⁄8" x 3⁄8" tools to be loaded simultaneously.

The four-way tool post allows for quick indexing to new tools. This is accomplished by loosening the top handle, then rotating the tool post to the desired position.

Tighten the top handle to lock the tool into position.

Top Handle

FG<I8K@FEJ

=`^li\)-%Four-way tool post and top

handle.

-25-