Cisco Systems SN 5428 manual Led

Chapter 1 Product Overview

Front-Panel LEDs

Each Fibre Channel port, FC 1 through FC 8, has two LEDs, labeled ACT and LOG. The LEDs are located to the left of each Fibre Channel port.

Table 1-1describes the LED indications.

Figure 1-4 SN 5428 Front-Panel LEDs

					CISCO STORAGE NETWORK 5428
	GIGABIT ETHERNET				S T O R A G E R O U T E R
					FIBRE CHANNEL1Gb/2gB
					73983
1	2	3	4	5	6
1 Gigabit Ethernet port, GE 1					4 10/100 Ethernet management port,
					MGMT 10/100
2 Gigabit Ethernet port, GE 2					5 10/100 Ethernet HA port,
					HA 10/100
3 FAULT, STATUS, and POWER					6 Fibre Channel ports, FC 1 through
					FC 8
Table 1-1 LED Indication Descriptions
LED			Color		Description (when LED is on)
GE 1 and		LINK	Green		Port is operational.
GE 2 LEDs		TX	Green		Packets are being transmitted.
		RX	Green		Packets are being received.
FAULT			Red		On if error condition in entire storage
					router.
					Flashing if error condition in a storage
					router component.
STATUS			Green		On after successful boot up.
					Flashing during boot up.
POWER			Green		Power is on.

	Cisco SN 5428 Storage Router Hardware Installation Guide
1-6	OL-4796-01