Craftsman 113.24181 owner manual Stop Screw

Page 25

If bladeISSQUAREtotable;

A. Checkpointer

If POINTERDOESNOTpointto the"0" markonthe bevelscale;

B. Loosenscrewandadjustpointer... usingmedium screwdriver.

If bladeisNOTSQUAREtotable..,the90° stopscrew mustbeADJUSTED.

1.Unscrewg0° STOPSCREWthreeor fourturnsusing 3/16in.setscrewwrench.

2.Tilt bladesothatit issquarewithtable.

3.Screw90° stopscrewINuntilit stops... checkonce againforsquarenessandreadjustscrew,if necessary.

4.CheckPOINTER... readjust, if necessary.

5.Tilt blade to 45 ° and adjust 45 ° STOP SCREW the

same way.

HEAD OF

COMBINATION SQUARE

90 °

STOP SCREW 45°

STOP SCREW

Image 25

Contents 113.24181 Model noFor Power Tools Location For Table SawsKickbacks Protection EYES, HANDS, FACE, EARS, BodyWear Your Motor Specfications Electrical RequirementsContents Unpacking and Checking Contents Turn the saw upside down AssemblyNUTS, HEX Attaching Table Extensions Checking Blade Squareness to TableNot Tighten Insert Installing RIP Fence Guide BarsHoldrodwithonehandandwitha 7/16 in. wrench or Aligning RIP Fence Rip fence must be Parallel with the sawblade Installing Blade GuardHEX Screvs Lock Parallel Space Eqljal to Approx Thicknesses of Paper Kerf WoodANTI-KICKBACK Pawls Setscrew WrenchesEtting to RN OW Your SAW ON-OFF SwitchLeft Limit StopsRight Auxiliary FacingEXACT-I-CUT Removing and Installing SawbladeRemove insert Work Helpers OperationCROSSCUTTING, Miter CUTTING, Bevel Cutting Push Stick and Push BlockRepetitive Cutting CrosscuttingManufacturing GrooveBeve L Crosscutting Miter CuttingCompound Miter Cutting Endanger Your HandsKickback Bevel RippingPush Block Cutti NG PAN ELS ResawingRabbeting Do not Back UP Reverse Feeding WhileMiter Gauge AdjustmentsTeeth Blade TILT, or Squareness Blade to TableStop Screw Elevation Lock MaintenanceOutlet Before Maintaining or Lubricating Your SAW Worm and Teeth Miter Guage22201 3218Trouble Probable Cause Outlet Before TroubleshootingProbable Cause TroubleRemedy Or fails to come up20m Parts List for Craftsman 12-INCH Motorized Table SAWParts List for Craftsman 12-INCHMOTORIZED Table SAW Model Number 50A 2852 Parts LiST for Craftsman 12-INCH Motorized Table SAW 62581 Fence Assembly Repair Service is Available AT Your Nearest Sears Store Parts List for Raftsman 12-INCHMOTORIZED Table SAWComplete Motor Assembly Box Assembly Control w/NameplateSTD See Wiring DIAGRAM,62325 Miter Gauge Assembly 62594 Guard Assembly Parts List for Craftsman 12-! NCH Motorized Table SAW62589 Table Extension Sears TAB LE SAW Service