UNPACKING AND CHECKING CONTENTS
TOOLS NEEDED
,P,iers @ Wrenches @
:iii! ?ii: iii iiii:!iii i;l 3/8in. 7/16in.
| 1/2 | in. | 9/16 in. |
Combination Square | 3/4 | in. |
|
Model 113.24181 Motorized Table Saw isshipped complete in one carton including Two Table Extensions and Steel
Legs.
Separate all parts from packing materials and check each one with the illustration and the list of Loose Parts to make
certain all items are accounted for, before discarding any packing material.
If any parts are missing, do not attemp to assemble the table saw, plug in the power cord or turn the switch on until the missing parts are obtained and are installed correctly.
Remove the protective oil that is applied to the table top and edges of the table. Use any ordinary household type grease and spot remover.
CAUTION: Never use gasoline, naptha or similar highly volatile solvents.
Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean, dry cloth.
WARNING: FOR YOUR OWN SAFETY, NEVER CONNECT PLUG TO POWER SOURCE OUTLET UNTIL ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU HAVE READ AND UNDERSTAND THE SAFETY AND OPERATIONAL INSTRUCTIONS.
8
3
|
| LiST OF LOOSE PARTS |
| ||
Key |
|
|
|
|
|
No. | Part Name |
|
| Qty. | |
1 | Leg |
|
| 4 | |
2 | Stiffener |
| 4 | ||
3 | Table Extension | 2 | |||
4 | Blade Guard and Spreader | .................... | 1 | ||
5 | Spreader Support | 1 | |||
6 | Miter | Gauge | ............................... | 1 | |
7 | Rip Fence |
| 1 | ||
8 | Fence Guide Bar with Rip Scale (Front) | 1 | |||
9 | Fence Guide Bar (Rear) | 1 | |||
10 | Guide Bar Rod | 1 | |||
11 | Arbor | Nut Wrench | 1 | ||
12 | Arbor | Wrench | 1 | ||
13 | Owners Manual | 1 | |||
| Pkg. of Miscellaneous Small Parts No. 62596 |
| |||
| Consisting of the Following: |
| |||
14 | Setscrew | Wrench, 3/32 | in | 1 | |
14 | Setscrew | Wrench, 1/8 | in | 1 | |
14 | Setscrew Wrench, 5/32 | in | 1 | ||
14 | Setscrew Wrench, 3/16 | in | 1 | ||
15 | Switch Key | 2 | |||
16 | 2 | ||||
17Hex Head Screw, 5/16
17Hex Head Screw, 5/16
17Hex Head Screw, 5/16
17Hex Head Screw, 1/4
17Hex Head Screw,
17 | Hex Head Screw, 1/4 | x 5/8 in. long .... | 2 | |
18 | Hex Nut, 5/16 |
|
| |
| (approx. | dia. of hole 5/16 | in.) | 28 |
18 | Hex Nut, | 1/4 |
|
|
| (approx. | dia. of hole 1/4 in.) | 18 | |
18 | Hex Nut, | 1/2 |
|
|
| (approx. | dia. of hole 1/2 in.) | 8 | |
19Lockwasher, 5/16 in. External Type
| (approx. dia. of hole | 5/16 | in.) | 28 | ||
19 | Lockwasher, | 1/4 in. External Type |
| |||
| (approx. dia. of | hole | 1/4 | in.) | 18 | |
20 | Guide Bar Spacer | ........................ |
| 2 | ||
21 | Thumbscrew, | 5/16 | x 1 in. long | 1 | ||
22 | Leveling Foot | ........................... |
|
| 4 | |
1516
SIZE
//_ I/2 IN.
T_ 1819
22
6