RedMax HC510DV manual Starter Rope Exchange,  28 

9. Maintenance

MA16

MA17

MA18

■STARTER ROPE EXCHANGE

WARNING

When exchanging the starter rope, pay attention so that built-in recoil spring does not jump out. Mistake in operation may end up with injury to the eye, etc. by jumped out spring.

The starter rope wears and deteriorates with usage. In case the rope becomes shaggy or partially worn, suggest exchanging it soon to avoid rope cut on operation site.

To exchange rope, ask sales dealer or obtain RedMax genuine part and go through following procedure:

1. Remove a recoil case from the machine. (MA16)

(1) Recoil case

2.Pull out the starter rope and make a temporary knot in the middle. Pull out the rope from the starter knob and unknot its end knot. (MA17)

(1)Starter rope

(2)Temporary knot

(3)Starter knob

(4)Washer

3.Unknot the temporary knot and slowly retract the rope.

4.After removing a reel fixing screw, take out a reel, spacer and washer from the recoil case while holding a recoil spring by left hand. (MA18)

(1)Recoil spring

(2)Reel

(3)Spacer

28 