RedMax HC510DV manual Parts list,  33 

Page 33

12. Parts list

CUT-OFF SAW

HC510DV

NOTE :

1.Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement.

2.KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.

3.When placing parts orders for repair and/or replacement, check if the model name and the serial number are applicable to those specified in the parts list, then use parts number described in the parts list.

4.The contents described in the parts list may change due to improvement.

5.The parts for the machine shall be supplied seven (7) years after the machine is discontinued. [It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.]

Dec 2002

APPLICABLE SERIAL NUMBERS :

200101 and up

33 

Image 33

Contents T2069-93110 HC510DVPage Contents Safety FirstSpecifications Parts location 4   5   6  Symbols on the machineBefore Using the Machine For safe operation 7   8  Working Gear and Clothing 9   10  Operation Safety PrecautionsMaintenance Safety Precaution After Using the SAW 11  SE1 Set upChange of Dust Stopper  12 Cutter blade Flange bolt Flange washer a SE2 SE3 SE4 Mounting of Cutter BladeFitting Dust Hose and Dust BAG Dust hose Metal band Dust bag Tying CordFuel HOW to MIX Fuel 14  Recommended Mixing Ratio Gasoline 50OILFor Your Engine LIFE, Avoid Fueling the UnitOP1 OP2 Starting Engine OperationClose  16 Safety lock Start setting button Throttle lever OP3 OP4 OP5Decomp valve OP6 SwitchStopping Engine OFFFor AN Efficient Cutting Operation OP7 OP8 Cutting OperationFront guide Horizontal Cutting Vertical CuttingAIR Cleaner MaintenanceAir cleaner cover Top plate Felt filter MA1MA3 MA2Spark Plug NGK BPM8YMA4 MA5 Cooling AIR Passage Blade Drive Belt 22  Disassembling Procedure MA6 MA7 MA8 MA9Belt Exchange  24  Assembling ProcedureIdler pulley Belt adjustment plate Bolt Tighten Slacken FAN Drive Belt Belt Tension Adjustment and ExchangeMA14  25 When adjusting, take the following steps Engine Adjustment MA15MA15  26  27   28  Starter Rope ExchangeNotch MA19 MA20 MA21 30   31  StorageTroubleshooting guide Check Probable Causes Action 32   33  Parts list 34  Cutter Unit HC510DV S/N 200101 and up 35   36  Power Unit 1 HC510DV S/N 200101 and up 37   38  Power Unit 2 HC510DV S/N 200101 and up 39   40  Carburetor HC510DV S/N 200101 and up 41  Accessories & Tool SET HC510DV S/N 200101 and upManufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée