RedMax HC510DV manual Safety First, Contents

Page 3

SAFETY FIRST

Instructions contained in warnings within this

manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death.

IMPORTANT

This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

CONTENTS

1.Parts location …………………………………4

2.Specifications …………………………………4

3.Warning labels on the machine ……………5

4.Symbols on the machine ……………………6

5.For safe operation ……………………………7

6.Set up …………………………………………12

7.Fuel……………………………………………14

8.Operation ……………………………………16

9.Maintenance …………………………………20

10.Storage ………………………………………31

11.Troubleshooting guide ………………………32

12.Parts list ………………………………………33

Image 3
Contents T2069-93110 HC510DVPage Contents Safety FirstSpecifications Parts location 4   5   6  Symbols on the machineBefore Using the Machine For safe operation 7   8  Working Gear and Clothing 9   10  Operation Safety PrecautionsMaintenance Safety Precaution After Using the SAW 11   12  Set upSE1 Change of Dust StopperDust hose Metal band Dust bag Tying Cord SE2 SE3 SE4 Mounting of Cutter BladeCutter blade Flange bolt Flange washer a Fitting Dust Hose and Dust BAGRecommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  14 For Your Engine LIFE, Avoid Fueling the Unit 16  OperationOP1 OP2 Starting Engine CloseSafety lock Start setting button Throttle lever OP3 OP4 OP5Decomp valve OFF SwitchOP6 Stopping EngineVertical Cutting OP7 OP8 Cutting OperationFor AN Efficient Cutting Operation Front guide Horizontal CuttingMA1 MaintenanceAIR Cleaner Air cleaner cover Top plate Felt filterNGK BPM8Y MA2MA3 Spark PlugMA4 MA5 Cooling AIR Passage Blade Drive Belt 22  Disassembling Procedure MA6 MA7 MA8 MA9Belt Exchange  24  Assembling Procedure 25  FAN Drive Belt Belt Tension Adjustment and ExchangeIdler pulley Belt adjustment plate Bolt Tighten Slacken MA14 26  Engine Adjustment MA15When adjusting, take the following steps MA15 27   28  Starter Rope ExchangeNotch MA19 MA20 MA21 30   31  StorageTroubleshooting guide Check Probable Causes Action 32   33  Parts list 34  Cutter Unit HC510DV S/N 200101 and up 35   36  Power Unit 1 HC510DV S/N 200101 and up 37   38  Power Unit 2 HC510DV S/N 200101 and up 39   40  Carburetor HC510DV S/N 200101 and up 41  Accessories & Tool SET HC510DV S/N 200101 and upManufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée