Graco 312359J Auto Display Screens, Potlife Screen, USB Screen, Recommended USB Flash Drives

Page 75

Auto Display Screens

Potlife Screen

The potlife screen automatically displays when a potlife advisory occurs. The screen automatically closes when the advisory end or the user presses the flush confirm button. Refer to the following table for more details.

Icon Function

Advisory has been issued.

Potlife timer is enabled.

Time after potlife expires. Starts at 0.00 and counts down in negative one minute intervals.

Press to mute advisory buzzer.

Press to confirm that mixed hose has been flushed. Resets potlife timer.

Appendix A

Icon Function

Flashes while data download is in process.

Check mark appears after download com- pletes. Indicates download was successful.

If download was not successful, appears.

Displays total memory to download and remaining memory left to download.

Displays time remaining for log download to complete.

Press to cancel download. If download is cancelled, remove USB flash drive.

Indicates which log(s) is being down- loaded.

USB Screen

The USB screen automatically displays and the selected log(s) automatically starts downloading when the USB flash drive is inserted into the control box.

NOTE:

Inserting the USB flash drive while the sprayer is run- ning automatically stops sprayer operation. Removing the USB flash drive automatically closes the USB screen.

The log selected for current download is displayed in the single box next to the USB icon. The other available logs are displayed in the boxes on the right side of the screen. Refer to the following table for more details.

Recommended USB Flash Drives

It is recommended that users use the USB flash drive (16A004) included with the XM sprayer for data down- load. However, the following USB flash drives can also be used, but are not available through Graco.

•Crucial Gizmo!™ 4GB USB flash drive (model JDO4GB-730) or 8GB USB flash drive (model 7DOD8GB-730)

•Transcend JetFlash® V30 4GB USB flash drive (model TS4GJFV30)

•Transcend JetFlash® 300 4GB USB flash drive (model TS4GJF300)

•Corsair Flash Voyager® 8GB USB flash drive (model CMFUSB2.0-8GB)

312359J

75

Page 74 Page 76
Image 75
Page 74 Page 76
Contents XM Plural-Component Sprayers312359J Contents Manual Description Related ManualsFire and Explosion Hazard Intrinsic Safety Equipment Misuse Hazard Location Category Key ModelsFilters ApprovalsXM a XM B XM D XM C XM E CodeMoisture Sensitivity Isocyanates OverviewUsage Material Self-Ignition Isocyanate HazardComponents a and B Changing MaterialsKeep Components a and B Separate Proper Lifting of Sprayer Lift Using a ForkliftLift Using a Hoist LocationInitial System Setup Component Identification Typical Setup 20 Gallon Hoppers with Recirculation Back View Fluid Control Assembly Fluid Control AssemblyIG Air Controls Junction Box/Heater ControlsAir Controls IG Junction Box/Heater ControlsLEDs User InterfaceInterface Display, Main Display Screen Components User Interface DisplaySetup Connect Power CordPower Cord Requirements Configure to Supply Power Non-hazardous location sprayers onlyTerminal Blocks Wire Sprayers with Explosion-Proof Heaters Connect Air SupplyHazardous location sprayers only Adjust Packing Nuts Connect Fluid Hose AssemblyBasic Operation Set System Settings Optional Set User Interface ParametersSet USB Parameters Set Maintenance Parameters Optional Set Maintenance ScheduleSet Maintenance Setpoints Set Temperature Limits Set Sprayer Limits OptionalSet Pressure Limits Prime Prime a and B FluidsGallon Hopper Shown Prime Prime Solvent Flush Pump Without Heat RecirculateHeat Fluid With HeatSpray Mix Manifold Restriction Stem Adjust B Machine Outlet RestrictionPressure Relief Procedure Relieve a and B Fluid PressureRelieve Pump Fluid Pressure and Flush Mix Hose To flush mixed material out of line with clean solvent Flush Mixed Material Flush Mix ManifoldUse Solvent Pump Follow Pressure Relief Procedure, Park Fluid Pump Rods Relieve pressure. See Pressure Relief Procedure,Follow Park Fluid Pump Rods on Shutdown Entire SystemSystem Verification Mix and Integration TestsPump and Metering Test System Verification Confirm Pump Test Batch Ratio Dispense Test Confirm Batch Dispense Test Down Stream Valve Leak TestXM Setup and Troubleshooting Guide Guidelines ProcedureFollow Park Fluid Pump Rods, USB Logs Download SetupDownload Procedure Download Data from USBDownload Data from USB Seals MaintenanceCleaning Procedure FiltersIcon Function AlarmsDiagnose Alarms Clear AlarmsAlarm Code Alarm Problem When Active Cause Solution Alarm Codes and TroubleshootingAdjust B Machine Outlet Pump Test Daily Check Recommended Optional User-Settable Maintenance Warnings Optional User-Settable Spray Limits Mode Control Logic Alarms Possible Alarms by ModeWhat Alert Where LED Diagnostic InformationAlarm Code Key Module Status LED Signal Diagnosis SolutionAccessories and Kits Hose Rack Kit Electric Heated Hose Power Supply KitDesiccant Dryer Kit Caster KitUser Interface Display Setup Functions key onCommand Functions key OFF or removed Appendix aSetup Mode Screens Home Setup Screens Icon FunctionHome Set Potlife/Hose Length System Setup ScreensPump Configuration System Number and USB SettingsFast Dosing Function Advisory B3A Alarm B4A Enable Setup ScreensMaintenance Setup Maintenance Setup ScreensUser Limits Setup Screens Process Pressure Limits for spray modeProcess Temperature Limits for spray mode Fluid Control Screens Operator Command Functions ScreensAlarm Control Screens Test ScreensRun Fluid Control Screens Power On/Enter ModeConfirm Pump Test Ratio ModeBatch Dispense Test Down Stream Valve Leak TestConfirm Batch Dispense Test Alarm Totalizers and Job Number Maintenance 1 ScreenMaintenance 2 Screen Reset Maintenance CounterRecommended USB Flash Drives Auto Display ScreensPotlife Screen USB ScreenExample Spray Log Metering Diagrams Metering Diagram without Remote Mix ManifoldAppendix B Metering Diagram with Remote Mix Manifold XM Metering Diagram with Remote Mix ManifoldPower Cord Guidelines Power Cord GuidelinesAppendix C System Dimensions without Hoppers DimensionsSystem Dimensions with Hoppers Two 20-Gallon Hoppers Side MountedTwo 20-Gallon Hoppers Rear Mounted Two 7-Gallon Hoppers One 20-Gallon Hopper and One 7-Gallon HopperXM50 Fluid Performance and Air Consumption Pump Performance ChartsCalculate Fluid Outlet Pressure Calculate Pump Air ConsumptionPerformance Charts , Technical DataTechnical Data 312359J Graco Information Graco Standard Warranty

312359J specifications

The Graco 312359J is a versatile paint sprayer designed for both DIY enthusiasts and professionals alike. Known for its powerful performance and user-friendly features, this sprayer is ideal for various painting tasks, from small interior projects to larger exterior applications.

One of the standout features of the Graco 312359J is its robust piston pump system, which can handle thicker materials without compromising on quality. This allows users to spray a wide range of coatings, including stains, sealers, and even heavy-duty paints. The sprayer is engineered to deliver consistent pressure, ensuring an even and professional finish on every job.

Another significant characteristic of the Graco 312359J is its ability to produce a fine mist, which helps to reduce overspray and material waste. This is particularly beneficial for intricate projects where precision is critical. Additionally, the adjustable spray pattern can be easily configured to suit various tasks, allowing users to switch from broad coverage to detailed work with minimal effort.

The convenience of portability is another important aspect of the Graco 312359J. It features a lightweight design, making it easy to maneuver around different work areas. The integrated carrying handle further enhances mobility, allowing users to transport the sprayer without hassle.

In terms of technology, the Graco 312359J incorporates an easy-to-use control system, ensuring that even beginners can achieve professional-quality results. The user-friendly design simplifies setup and maintenance, while the quick-connect nozzle system allows for easy changes between different spray tips.

Moreover, the sprayer is equipped with a durable and easy-to-clean design. Users can quickly flush out the system after use, saving time and maintaining the equipment's longevity.

Ultimately, the Graco 312359J stands out for its combination of power, portability, and advanced features, making it an excellent choice for anyone looking to achieve a flawless finish. Its blend of practicality and efficiency caters to a wide range of applications, helping both novice and experienced users achieve outstanding results with ease. Whether tackling a home renovation or a professional job, this paint sprayer is designed to meet various painting needs effectively.
Top Page Image Contents