Graco 332458B important safety instructions General Information, Mounting the PD2K Base Unit

Page 18

General Information
General Information	Location

•Reference numbers and letters in parentheses in the text refer to numbers and letters in the illustrations.

•Be sure all accessories are adequately sized and pressure-rated to meet system requirements.

•To protect the screens from paints and solvents, clear-plastic protective shields (10 per pack) are available. Order Part No. 197902 for the Advanced Display Module. Clean the screens with a dry cloth if necessary.

To prevent tipping which can cause serious injury and equipment damage, the mounting stand must be securely anchored to the ﬂoor or to an appropriate base. The stand is not intended for free-standing use or wall mounting.

Mounting the PD2K Base Unit:

•Mount the PD2K in a non-hazardous location.

•Ensure that the mounting surface and mounting hardware are strong enough to support the weight of the equipment, ﬂuid, hoses, and stress caused during operation.

•Do not mount to a wall.

•Secure the stand to the ﬂoor with 1/2 in. (13 mm) bolts which engage at least 6 in. (152 mm) into the ﬂoor to prevent the unit from tipping. See Dimensions, page 36.

•There must be sufﬁcient space on all sides of the equipment for installation, operator access, maintenance, and air circulation. The fans at the back of the unit require a minimum of 6 in. (152 mm) clearance from the closest surface to ensure adequate air circulation.

18

332458B

Image 18

Contents Important Safety Instructions ProMix PD2K Proportioner for Automatic Spray ApplicationsContents Related ManualsModels 0359Model AC2000 High Pressure Identiﬁcation Label Fire and Explosion Hazard Electric Shock HazardMoving Parts Hazard Intrinsic SafetySkin Injection Hazard Toxic Fluid or FumesPersonal Protective Equipment Equipment Misuse HazardMoisture Sensitivity of Isocyanates Important Isocyanate ISO InformationIsocyanate Conditions Changing MaterialsSystem Control Drawing 16P577 Length ft mNON-HAZARDOUS Location only Hazardous Classified LocationConﬁgure Your System Select a Base ModelComponent Description Typical Installation Hazardous Classified Location NON-HAZARDOUS Location onlyRecommended Hose Sizes internal diameter for a and B Select HosesHose Selection Tool Viscosity Ratio Resin a Catalyst BSelect a Spray Gun Spray GunsApplication Gun Model Gun Manual No Select Non- is Color and Catalyst Change Kits Low Pressure Circulating KitsKit Part No Kit Description Select is Remote Color Change Kits Color + Solvent ValvesSelect Pump Expansion Kits General Information Mounting the PD2K Base UnitInstall the Display Module Advanced Display Module Connection PortsAir Connections Air SupplyAir Requirements Key Connection DescriptionFluid Supply Fluid RequirementsSingle Color Connections Color Change ConnectionsTSL Cup Kit Catalyst 35 cc pumps Repeat for the lower throat cartridgeSolvent Meter Accessory Light Tower AccessoryElectrical Requirements Wire KeyElectrical Supply Electrical ConnectionsGrounding Hazardous Location NON-HAZARDOUS Location KeyObject Being Sprayed Solvent Reservoir or Purge StationCheck Resistance Electrical Schematics Power ModuleEfcm Efcm J8 J9 J15 J16 J14 J10 J15 J16 Electrical Schematic, Sheet 3, Hazardous Location Optional Cables Modules Dimensions Technical Data Positive Displacement Metric ProportionerGraco Standard Warranty Graco Information