Graco 332458B important safety instructions Single Color Connections, Color Change Connections

Page 22

Fluid Supply

Single Color Connections

NOTE: Check valves (J, L) are provided on the inlet

(K) and outlet (H) manifolds of each pump.

1.Connect the color supply line to the pump ﬂuid inlet ﬁtting (S).

2.Connect the color outlet line to the pump ﬂuid outlet ﬁtting (R).

3.Make the same connections on the catalyst side.

NOTE: For isocyanate catalyst materials, moisture resistant hose is required to supply ﬂuid to the system and also as a ﬂuid line between the pump and the mix manifold.

Figure 12 Pump Inlet and Outlet Connections

Color Change Connections

If you are installing the color change accessory kit, make the ﬂuid connections as described in manual 333282.

22

332458B

Image 22

Contents Important Safety Instructions ProMix PD2K Proportioner for Automatic Spray ApplicationsContents Related ManualsModels 0359Model AC2000 High Pressure Identiﬁcation Label Fire and Explosion Hazard Electric Shock HazardMoving Parts Hazard Intrinsic SafetySkin Injection Hazard Toxic Fluid or FumesPersonal Protective Equipment Equipment Misuse HazardMoisture Sensitivity of Isocyanates Important Isocyanate ISO InformationIsocyanate Conditions Changing MaterialsSystem Control Drawing 16P577 Length ft mNON-HAZARDOUS Location only Hazardous Classified LocationSelect a Base Model Conﬁgure Your SystemComponent Description Typical Installation Hazardous Classified Location NON-HAZARDOUS Location onlyRecommended Hose Sizes internal diameter for a and B Select HosesHose Selection Tool Viscosity Ratio Resin a Catalyst BSpray Guns Select a Spray GunApplication Gun Model Gun Manual No Low Pressure Circulating Kits Select Non- is Color and Catalyst Change KitsKit Part No Kit Description Select is Remote Color Change Kits Color + Solvent ValvesSelect Pump Expansion Kits General Information Mounting the PD2K Base UnitInstall the Display Module Advanced Display Module Connection PortsAir Connections Air SupplyAir Requirements Key Connection DescriptionFluid Supply Fluid RequirementsSingle Color Connections Color Change ConnectionsTSL Cup Kit Catalyst 35 cc pumps Repeat for the lower throat cartridgeSolvent Meter Accessory Light Tower AccessoryElectrical Requirements Wire KeyElectrical Supply Electrical ConnectionsGrounding Hazardous Location NON-HAZARDOUS Location KeySolvent Reservoir or Purge Station Object Being SprayedCheck Resistance Electrical Schematics Power ModuleEfcm Efcm J8 J9 J15 J16 J14 J10 J15 J16 Electrical Schematic, Sheet 3, Hazardous Location Optional Cables Modules Dimensions Technical Data Positive Displacement Metric ProportionerGraco Standard Warranty Graco Information