f.Place u-bolt on pump door protrusion.
ti6375a
8. Ratchet pump door forward.
ti6377a
9. Open pump door.
10. Pull out pump pin and place in pin holder.
ti7327a
Displacement Pump Replacement 1095/1595/Mark V
Installation
1.Adjust piston rod with pin holder to pull out piston rod. Tap piston rod on hard surface to push in piston rod.
2.Push pump collar flush with bearing housing ledge to be able to close pump door.
ti6325a
ti5492a
3.Slide pump into connecting rod. Push pump pin until it is fully retained.
NOTE: Pin will snap into position.
ti6378a
ti7328a
3A0157A | 35 |