Graco Inc 3A0157A, 695 Premium Hi-Boy, 795 Premium Hi-Boy, 1095 Premium Hi-Boy Hose Reel, Removal

Page 37

Hose Reel

Removal

Be sure to keep your head clear of hose reel while winding up hose.

1.Remove hose fitting from swivel cap and completely remove hose.

ti13539a

2. Remove cap from swivel.

ti13675a

Hose Reel

5. Remove snap ring.

ti13542a

6. Remove hose reel.

ti13540a

7.Remove rigid fluid tube from swivel shaft (if neces- sary).

3. Remove E-clip from swivel shaft.

ti13538a

ti13541a

8. Remove swivel shaft (if necessary).

4. Remove swivel.

ti13544a

ti13543a

3A0157A

37

Image 37

Contents Mark Electric Airless SprayersUltra MAX lIl ModelsTable of Contents Grounding Grounding InstructionsSkin Injection Hazard Fire and Explosion HazardElectric Shock Hazard Equipment Misuse HazardPressurized Aluminum Parts Hazard Moving Parts HazardComponent Identification Pressure Relief Procedure Grounding Power RequirementsPails Extension CordWhat to Check What to do Type of Problem TroubleshootingMechanical/Fluid Flow Follow Pressure Relief Procedure on What to Check What to do Type of Problem Electrical Type of Problem What to Check HOW to CheckCheck to see if transducer and control board Step Check Motor Thermal Switch Unplug thermal Is not correct, replace motor YES Sprayer Will Not Shut OffSprayer Will Not Run Step VAC and 110 VAC Motor Control Board Removal Installation33 D 115 Removal VAC Filter BoardPressure Adjust Potentiometer Pressure Control Transducer Install control box 61 and control panel 68 with four screws 3A0157A Disassembly Drive and Bearing Housing ReplacementAssembly Drive and Bearing Housing Replacement Installation Motor ReplacementRemoval Motor Replacement Perform Relieve Pressure Procedure Displacement Pump Replacement for 695/795/MarkTi7169a Perform Pressure Relief Procedure, Displacement Pump Replacement 1095/1595/MarkPlace u-bolt on pump door protrusion Attach drain hose to sprayer Hose Reel Grease shaft Install swivel Removal Installation Reed Switch Replacement120V Models Wiring Diagram120V Models with 15/20 Amp Switch 240V Models 3A0157A For Graco Canada Customers Graco Standard Warranty