Graco Inc 311001C important safety instructions Daily Gun Care, Flushing, and Cleaning

Page 13

Daily Gun Care, Flushing, and Cleaning

Daily Gun Care, Flushing, and Cleaning

SKIN INJECTION HAZARD

Follow the Pressure Relief Procedure on page 10 before cleaning the gun.

CAUTION

Methlyene chloride with formic or propionic acid is not recommended as a flushing or cleaning solvent with this gun as it will damage aluminum and nylon compo- nents.

CAUTION

Solvent left in gun air passages could result in a poor quality paint finish. Do not use any cleaning method which may allow solvent into the gun air passages.

Do not point the gun up while cleaning it.

Do not wipe the gun with a cloth soaked in solvent; wring out the excess.

TI6563A

TI4827A

 

Do not immerse the gun in solvent.

Do not use metal tools to clean the air cap holes as this may scratch them; scratches can distort the spray pat- tern.

TI6564A

TI6565A

 

311001C

13

Image 13
Contents Model G40 Model G15Model G40 w/RAC tip II 2 GModels ContentsRelated Manuals Fire and Explosion Hazard Pressurized Aluminum Parts Hazard Typical Installation Grounding InstallationFluid Line Air LineSetup Reverse-A-CleanRAC Tip Pressure Relief Procedure SafetyOperation Trigger LockHow the Air-Assisted Spray Gun Operates Spray Pattern AdjustmentNo air Too little air correct amount Air Fluid Application Hvlp OperationDaily Gun Care, Flushing, and Cleaning Fluid Filter Maintenance General System MaintenanceFlushing and Cleaning Connect the solvent supply hose T to the gun Clearing a clogged RAC tip Disengaged General Troubleshooting TroubleshootingFollow Pressure Relief Procedure on page 10. Read warnings, Problem Cause SolutionTroubleshooting Fan Valve Replacement Items Needed for ServiceRepair Repair KitsNeedle Repair 5g* 5c† 5d† 5b†13‡ 14‡ Air Valve Repair Fluid Tube ReplacementRepair 311001C Reassembly 5b† G40 only 5c† 5d† Parts Washer Ptfe Part No. Description QtyPart No /G40 Gun w/RAC Tip TIP GUARD/AIR CAP Assy Spray Tips, for use with AA Series Air Cap Spray Tip Selection ChartAAM Fine Finish Spray Tips GG4 Industrial Spray TipsLTX RAC Spray Tips RAC SwitchTips, for use with AA Series Air CapWRX WideRAC Spray Tips FFT Fine Finish RAC Spray TipsAccessories Category Data Technical Data10.6 Gun Inlet Pressure PSI Dimensions Graco Information Graco Standard Warranty