Installation
Installation
Typical Installation | Grounding |
The typical installation shown in FIG. 1 is only a guide for selecting and installing
VENTILATE THE SPRAY BOOTH
To prevent hazardous concentrations of toxic and/or flammable vapors, spray only in a properly ventilated spray booth. Do not operate the spray gun unless ventilation fans are operating.
Check and follow all of the National, State, and Local codes regarding air exhaust velocity requirements.
Check and follow all local safety and fire codes.
Check your local electrical code and pump manual for detailed grounding instructions. Use only electrically conductive fluid hoses.
Ground the spray gun through connection to a prop- erly grounded fluid supply hose and pump.
D
B
E
AG
C
TI6554A
FIG. 1: Typical Installation (Model G15 Shown) |
| F | |
|
| ||
|
|
| |
Key: |
|
| |
A | Air Line Filter | E | Spray Gun |
B | Air Shutoff Valve | F | Electrically Conductive Fluid Hose |
C | Gun Air Pressure Regulator | G | Gun Air Supply Hose |
D | Air Line |
|
|
6 | 311001C |