Graco Inc 311001C important safety instructions Pressurized Aluminum Parts Hazard

Page 5

Warnings

WARNING

PRESSURIZED ALUMINUM PARTS HAZARD

Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDS’s to know the specific hazards of the fluids you are using.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

PERSONAL PROTECTIVE EQUIPMENT

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

311001C

5

Image 5
Contents Model G40 Model G15Model G40 w/RAC tip II 2 GModels ContentsRelated Manuals Fire and Explosion Hazard Pressurized Aluminum Parts Hazard Typical Installation Grounding InstallationFluid Line Air LineSetup Reverse-A-CleanRAC Tip Pressure Relief Procedure SafetyOperation Trigger LockNo air Too little air correct amount Air Spray Pattern AdjustmentHow the Air-Assisted Spray Gun Operates Fluid Application Hvlp OperationDaily Gun Care, Flushing, and Cleaning Flushing and Cleaning General System MaintenanceFluid Filter Maintenance Connect the solvent supply hose T to the gun Clearing a clogged RAC tip Disengaged General Troubleshooting TroubleshootingFollow Pressure Relief Procedure on page 10. Read warnings, Problem Cause SolutionTroubleshooting Fan Valve Replacement Items Needed for ServiceRepair Repair Kits13‡ 14‡ 5g* 5c† 5d† 5b†Needle Repair Air Valve Repair Fluid Tube ReplacementRepair 311001C Reassembly 5b† G40 only 5c† 5d† Parts Washer Ptfe Part No. Description QtyPart No /G40 Gun w/RAC Tip TIP GUARD/AIR CAP Assy Spray Tips, for use with AA Series Air Cap Spray Tip Selection ChartAAM Fine Finish Spray Tips GG4 Industrial Spray TipsLTX RAC Spray Tips RAC SwitchTips, for use with AA Series Air CapWRX WideRAC Spray Tips FFT Fine Finish RAC Spray TipsAccessories 10.6 Gun Inlet Pressure PSI Technical DataCategory Data Dimensions Graco Information Graco Standard Warranty