
English
HOW TO SELECT TIGHTENING TORQUE
Table 7
Cap | Tightening torque | Operation example | |
position | |||
|
| ||
|
|
| |
1 | Approximately 18 | Machine screw | |
|
| tightening. | |
4 | Approximately 27 | ||
Screw tightening for | |||
|
| ||
7 | Approximately 37 | ||
soft wood material. | |||
10 | Approximately 47 | Screw tightening for | |
|
| ||
16 | Approximately 67 | ||
hard wood material. | |||
|
| ||
22 | Approximately 87 |
| |
|
|
| |
| High speed: Approximately 106 |
| |
| (122 |
| |
| Approximately 124 | Thick screw tightening. | |
| (143 | ||
|
| When used as a drill. | |
| Low speed: Approximately 442 | ||
|
| ||
| (550 |
| |
| Approximately 510 |
| |
| (633 |
| |
|
|
|
NOTE:
The selected content shown in Table 7 indicates the differences according to screw type, screw size and material used.
CAUTION:
●While operating the Cordless driver drill, take care not to lock the motor. If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.
●Do not tighten too strongly as the screw heads will be damaged.
26