Bosch Power Tools 11524 manual DRILL/HAMMER Drill Selection Dial, Installing Accessories

Page 9
! WARNING

BM 1619929562 10/03 10/2/03 3:01 PM Page 9

DRILL/HAMMER DRILL SELECTION DIAL

The selector dial allows the tool to be set for various drilling applications. Shift the dial right or left depending on the below applications.

!CAUTION Do not operate the selection dial until the tool

come to a complete stop. Shifting during rotation of the chuck can cause damage to the tool.

Do not use demolition or chipping bits such as bull points, chisels, spades, gouges, etc.

Drill only action: For drilling in woods, metals, plastics or other non concrete materials.

Drill with hammer action: For drilling in concrete, asphalt, tile or other similar hard materials.

INSTALLING ACCESSORIES

Disconnect battery pack from tool or place the switch in the locked or off position before

making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

Clean the insert shank end of the accessory to remove any debris, then lightly grease with a light oil or lubricant.

Insert accessory into the tool holder through the dust shield, while twisting and pushing inward until it locks automatically into place. Pull outward on the accessory to be certain it is locked into the tool holder (Fig. 2).

FIG. 2

sharp and undamaged accessories are used. The “cost” to maintain sharp and undamaged accessories is more than offset by the “time saved” in operating the tool with sharp accessories.

REMOVING ACCESSORIES

!WARNING When removing the bit from the tool avoid contact

with skin and use proper protective gloves when grasping the bit or accessory. Accessories may be hot after prolonged use.

To remove an accessory, pull the locking sleeve backwards (towards the rear of tool), while pulling the accessory outward. All accessories should be wiped clean after removing (Fig. 3).

FIG. 3

NOTE: The high efficiency available from the rotary hammers can only be obtained if

RELEASING AND INSERTING BATTERY PACK

Release battery pack from tool by pressing on both sides of the battery release tabs and pull downwards. Before inserting battery pack, remove protective cap from battery pack. To insert battery, align battery and slide battery pack into tool until it locks into position. Do not force.

Your battery pack is equipped with a

secondary locking latchs to prevent the battery pack from completely falling out of the handle, should it become loose due to vibration.

If any of the locking latches are broken (Fig. 4 & 5). Return your tool to the nearest Authorized Service Center to be repaired or replaced

-9-

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating/Safety Instructions For All Battery Operated Tools General Safety RulesService Cordless Rotary Hammer Safety RulesBattery/Charger NICKEL-METAL Hydride Batteries NICKEL-CADMIUM BatteriesSymbols Cordless Rotary Hammer Functional Description and SpecificationsOperating Instructions Removing Accessories Installing AccessoriesReleasing and Inserting Battery Pack DRILL/HAMMER Drill Selection DialCharging Battery Pack Important Charging Notes INDICATORS, Symbols and MeaningDrilling Wood or Plastic Drilling MetalMaintenance Drilling MasonryBatteries Accessories Aire de travail Consignes générales de sécurité Pour tous les outils à pileSécurité électrique Sécurité des personnesConsignes de sécurité pour le marteau rotatif sans cordon RéparationProvoquant ainsi une perte de contrôle et des blessures Le plomb provenant des peintures à base de plomb Chargeur de pileEntretien des piles Piles NICKEL-CADMIUMPiles NICKEL-HYDRURE DE Métal Tours ou mouvement alternatif par SymbolesPosition. Un nombre plus élevé signifie Une vitesse plus grandeMarteau rotatif sans fil Description fonctionnelle et spécificationsBC016 Bloc piles BAT031 Tension nominale 120Consignes de fonctionnement Dépose DE L’ÉQUIPEMENT Accessoire Pose DE L’ÉQUIPEMENT AccessoireCadran DE Sélection DE PERCEUSE/PERCEUSE À Percussion Dépose ET Repose DU BLOC-PILESCharge DU BLOC-PILE TÉMOINS, Symboles ET Signification Remarques Importantes Concernant LA ChargePerçage Dans LE Métal Service EntretienNettoyage Poignée auxiliaire 360˚ AccessoiresGuide de profondeur Étui Mandrin 3 mors Adaptateur SDS pour mandrin standardSeguridad eléctrica Area de trabajoSeguridad personal Utilización y cuidado de las herramientasServicio Normas de seguridad para martillos giratorios sin cordónBatería/cargador Baterías DE NIQUEL-CADMIO Cuidado de las bateríasCadmio Ni-Cd indica que Robert Baterías DE NIQUEL-HIDRURO MetalicoSímbolos Con aislamiento dobleDe Ni-Cd Descripción funcional y especificaciones Martillo giratorio sin cordónPaquete de baterías BAT031 Tensión nominal 120 Instrucciones de funcionamiento Instalacion DE Accesorios Dial DE Seleccion DE TALADRO/TALADRO DE PercusionRemocion DE Accesorios Liberacion E Insercion DEL Paquete DE BateriasCarga DEL Paquete DE Baterias Baterías esté totalmente cargado INDICADORES, Simbolos Y SignificadoNotas Importantes Para Cargar Taladrado DE Madera O PlasticoLimpieza MantenimientoBaterias Lubricacion DE LAS HerramientasCapacidad AccesoriosBM 1619929562 10/03 10/2/03 301 PM Remarques Notas Limited Warranty of Bosch Portable and Benchtop Power Tools

11524 specifications

The Bosch Power Tools 11524 is a versatile rotary hammer that combines power, efficiency, and user-friendly features. Designed for professionals and DIY enthusiasts alike, this tool is perfect for drilling and chiseling into a variety of materials, including concrete, brick, and masonry.

One of the standout features of the Bosch 11524 is its powerful motor, which delivers an optimum performance with a 7.5-amp rating. This strength allows the tool to achieve a remarkable impact energy of 2.9 joules, making it particularly effective for tough applications. The rotary hammer operates with a variable speed control, providing users with the flexibility to choose the right speed for their specific task, whether it involves drilling into heavy-duty materials or lighter tasks.

The Bosch 11524 is equipped with an SDS-plus bit system, which facilitates quick and easy bit changes without the need for additional tools. This feature is highly beneficial for users who frequently switch between different drill bits during a task, increasing productivity and efficiency on the job site. Additionally, it allows for a secure grip, ensuring that your bits stay firmly in place during operation.

Another important technology incorporated in the Bosch 11524 is the vibration control system. This innovative feature significantly reduces the amount of vibration felt by the user, allowing for extended work periods without discomfort. The ergonomic design of the handle further enhances user comfort, providing better control and stability during use.

Safety features are also prominent in the Bosch 11524. The tool comes with a sturdy overload clutch, providing protection from tool failure in case of a binding or sudden impact while drilling. This safeguard not only helps in prolonging the lifespan of the machine but also ensures the safety of the user.

The Bosch Power Tools 11524 is built to last, with a robust construction that withstands demanding job site conditions. Its compact design enhances maneuverability, making it easier to operate in tight spaces.

In conclusion, the Bosch Power Tools 11524 rotary hammer is a feature-rich tool designed for efficiency, comfort, and safety. With its powerful motor, innovative technologies, and user-oriented design, it is an excellent addition to any toolbox, ensuring that users can tackle a wide range of projects with confidence and ease.
Top Page Image Contents