Important Points of Safety

!Attention

Attention points for use

*Ensure ventilation of the room

if the machine is used with burning facilities. Deficient ventilation can cause oxygen

shortage.

*Check whether installation bench of the machine is damaged after a long period of use. Machine on damaged bench may fall down and cause human injury or other damage.

*In place where winds produced by the machine can reach, donít lay any animals or plants which may be hurt otherwise.

*Donít put vases containing water or other else on the unit assembly. Otherwise, the machine may be immersed internally and result in bad electric insulation causing

electric shock.

*The is machine CANNOT be used for the purpose of prese- rving food, animals, plants, precision instruments and artwork etc., which may be destroyed otherwise.

*DONíT replace fuse with ma- terial other than fuse of proper capacity. Replacing fuse with metal wire or copper etc. can cause fire hazard or other faults.

*DONíT lay any burning facilities in place where winds produced by the machine can reach. Incomplete combustion of burning facility may be caused otherwise.

*DONíT clean the machine with water. Electric shock may occur otherwise.

*DONíT put flammable spray articles nearby or spray them to the machine. Fire hazard may occur otherwise.

*DONíT operate switch with wet hand. Electric shock may occur otherwise.

*Stop operation and shut down manual power switch before cleaning and maintenance.

*The power supply MUST be of

rated voltage and connected with special electrical supply circuit.