Operating Instructions
Sleep Function
Note: Before using this function, must adjust the clock, or the sleep function will be disordered.
Comfortable Sleep
At night, before going to bed you can press down the SLEEP button on the controller and the air- conditioner will run by the comfortable sleeping mode to make you sleep more comfortable.
|
| MODE | FAN | SWING |
|
| TEMP | HEALTH | |
|
| CLOCK |
| SET |
| SET | TIMER |
| SLEEP |
|
|
| ||
| OFF |
| FILTER RESET RESET | |
AM |
| AM |
|
|
ON/OFF 
T E M P
ON
OFF
SWINGFAN
MODE SLEEP
HEALTH FRESH
CLOCKSET
TIMER
RESET | LIGHT LOCK |
In cooling, dehumidifying mode
One hour after sleeping operation start, the temp. is 1 C higher than the setting one. After another hour the temp. rises 1C and then run continuously for another 6hrs' and then close. The actual temp. is higher than the setting one which is to prevent from being too cool to your sleep.
In heating mode
One hour after start up, the temp. decrease 2 C lower than the setting one. After another hour decrease by more 2 C.
The temperature will automatically rise by 1 C after another 3hrs' operation, and then automatically close after 3hrs' continuous operation. The actral temperature is lower than the setting one which is to prevent from being too hot to your sleep.
Note:
In AUTO mode, unit will run in SLEEP function according to the operation mode.
After setting SLEEP function, it is forbidden to calibrate clock.
If the set
Set
After setting sleep function, not allowed to adjust the clock. Can't use the remote controller operate the AC. If so, please cancel the sleep function first.
After setting sleep function, can't set the timing function.
SETTING T |
| SHUT DOWN |
1 hr | decrease 2 C |
|
|
| |
| 1 hr |
|
| decreases 2 C | |
|
| about 3 hrs |
| 3 hrs | increase1 C |
SLEEP RUN BEGINS | SLEEP RUN STOPS |
Heat mode
SLEEP RUN BEGINS | SLEEP RUN STOPS |
|
| about 6 hrs |
| 1 hr | increase 1 C |
1 hr | increase 1 C | |
|
| |
SETTING T |
| SHUT DOWN |
Cooling mode
1 5