Operating Instructions AUTO RUN, COOL,HEAT and DRY operation
Recommendations
Use COOL in summer.
Use HEAT in winter.
Use DRY in spring,autumn and in damp climate.
|
| MODE FAN | SWING |
AUTO | 2 | TEMP | HEALTH |
| |||
|
| 4 | |
|
| CLOCK3 | SET |
SET |
| TIMER | SLEEP |
AM |
| FILTER RESET RESET | |
|
|
| |
5
ON/OFF 
1
T E M P |
|
ON |
|
OFF |
|
SWING | FAN |
5 |
|
MODE | SLEEP |
HEALTH FRESH |
|
CLOCK | SET |
TIMER |
|
RESET | LIGHT LOCK |
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display (Not Timer setting). Power indicator lights up.
(2) Select operation mode
Press MODE button. For each press, operation mode changes as follows:
Press FAN button. For each press, fan speed changes as follows:
Wire controller
LOW MID HIGH
Remote controller
LOW MID HIGH
AUTO
AUTO
A
U
T
O
AUTO
AUTO COOL DRY HEAT FAN
Unit will run in operation mode displayed on LCD. Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button
Every time the button is pressed, temp. setting increases 1 
C.
If button is kept depressed, temp.setting will increase quickly.
Every time the button is pressed, temp. setting decreases 1
C.
If button is kept depressed, temp. setting will decrease quickly.
Unit will start running to reach the temp. setting on LCD.
Unit runs at the speed displayed on LCD.In HEAT mode, warm air will blow out after a short period of time due to
In DRY mode, when room temp. becomes 2 C higher than temp. setting, unit will run intermittently at LOW speed regardless of FAN setting.
(5) Unit stop
Press ON/OFF button.
Only time and room temp remains on LCD. All indicators go out.
Vertical flap closes automatically.
Hints
Wire controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.
(4) Fan speed selection
Auto running: During the Auto running mode, air conditioning running and can
Fan running: The AC only have air supply running no cooling and heating running at the condition, AC can't have auto air supply running, and can't display the setting temperature value on the LCD.
During the heating running, after start the AC, in order to prevent cooled air, AC can stop for a while before send heat air.
During the dehumification running, when the room temp. setting temp. , not setting condition according to the air speed.
1 2