Please make sure to check and clean the drain trap at least once a month. Remove any material that has gathered in the drain trap and dispose of it. Clean the drain trap and put it back in its original position.
6.3Honeycomb Assemblies (at least every 3 months)
Because Honeycomb Assemblies may deform under pressure, DO NOT use vacuum cleaners to clean them.
a.When merchandise is in place under the Honeycomb Assembles, first cover the merchandise with a cloth or other material to keep dust from falling.
b.Remove Honeycomb Assemblies by pulling down on the wire clips attached to the assemblies.
c.Rinse Honeycombs in running water in order to flush out dust, etc. Dust is best removed by spraying/flushing from the cleaner side
toward the dirtier side.
d.After thoroughly shaking and drying rinsed Honeycomb Assemblies, replace them in their original positions in the SANYO Cases.
22