Dell MD3220, MD3200 manual Automatic Storage Array Discovery

4Finally, add the last three bytes of the MAC address FE80::0200:08FF:FEAA:BBCC.

NOTE: This procedure applies to out-of-band management only. If you choose to set up in-band management, you must complete this step and then proceed to "Step 8: (Optional) Set Up In-Band Management" on page 72.

You can discover the storage array either automatically or manually. Select one and complete the following procedure.

Automatic Storage Array Discovery

1Launch MD Storage Manager (MDSM).

If this is the first storage array to be set up, the Add New Storage Array window is displayed.

2Select Automatic and click OK.

It may take several minutes for the discovery process to complete. Closing the discovery status window before the discovery process completes cancels the discovery process.

Appendix—Manual Configuration of iSCSI

55