Ciprico 21021625 B manual Preparing the Installation Site, Weight

Preparing the Installation Site

The first step for installing any FibreSTORE RAID system in any rack is to select an appropriate location for the rack. Use the information in Table 2 to prepare the site.

	Ciprico Rack				Disk	Controller	Cache Reten-
					Enclosure	Enclosure	tion Unit
Dimensions	24" w x 77" h x 35"				17" w x 7" h x	17.5" w x 3.5"	17.5" w x 3.5"
	d				24" d	h x 24" d	h x 18" d
	(61 cm x 195.6 cm				(43.2 cm x	(44.5 cm x 8.9	(44.5 cm x 8.9
	x 88.9 cm)				17.8 cm x 61	cm x 61 cm)	cm x 45.7 cm)
					cm)
Weight	Approximately				Approximately	40 lbs (19 Kg)	65 lbs (30 Kg)
	400 lbs (181.4 Kg)				80 lbs (37 Kg)	with dual
	empty; 1100 lbs					controllers
	(499 Kg) fully
	assembled
Power	200 - 240 VAC,				100 - 120 / 200	DC input from	208 to 240
Requirements	50/60 Hz,				- 240 VAC, 50	FibreSTORE	VAC, 6.5 amp
	maximum 20				/60 Hz, 6/3	disk enclosure,	maximum
	amps,				amps	maximum	output
	single phase					60 watts
Operating	5°	to 40°	C (41°	to	104° F) with 7,200 rpm drives
Temperature	5°	to 35°	C (41°	to 95° F) with 10,000 rpm drives
Rack Plug Type	Dual Power cords have 30A 250V plugs NEMA L6-30P
Cooling	Approximately 10,000 BTU/hr fully assembled
Requirements
Cable Entry	Rear, at bottom of rack
Airflow	Through front of disk enclosures and out the top and back of rack
Rear clearance	10 inches
Front clearance	6 inches
Top clearance	6 - 12"
Side clearances	Ciprico rack has side doors - approximately 2 feet when fully open
		Table 2. Rack and Components Information

10FibreSTORE RAID System: Rack Installation Guide