Ciprico 21021625 B manual Putting on the Filler Panels, Putting on Filler Panels

Step 5. Putting on the Filler Panels

This step finishes off the front of the rack so that no openings show.

Put the panels in place as shown in Figure 16. Each panel has magnetic strips on the back side so that they easily adhere to the rack.

1.Put horizontal panels wherever there is an open slot or half slot. There are two sizes of horizontal panels: the half-high cover goes above the controller enclosure; the full- size panel goes over any empty disk enclosure slot.

2.Put vertical panels over all of the rack channel mounts.

Horizontal half panel

Vertical half panel

Vertical full panel

2269

Figure 16. Putting on Filler Panels

Chapter 2: Installing in a Ciprico Rack 23