3.Using caution, push in the tabs for the lock buttons located on each slide rail that is mounted on the disk enclosure (Figure 13), and slide the enclosure in until the lock buttons fit securely into the mating holes in the flange mount. You should hear a click when the lock buttons slide into the mating holes.
WARNING Be very careful not to pinch fingers when completing this step.
Front Channel Mount
Stationary Flange Mount
Stationary
Flange Mount
Front Mounting
Screws
Tab for Lock Button
Enclosure
Slide Rail mounted on Disk Enclosure
2247
Figure 13. Adjusting Lock Buttons on Slide
4.Open the side doors and push the lock buttons. Slide enclosure into position
5.Repeat steps 1 - 4 for each enclosure.
Chapter 2: Installing in a Ciprico Rack | 19 |