Bostitch FN1664 manual Tool Specifications, Fastener Specifications

TOOL SPECIFICATIONS

All demensions in inches unless otherwise specified.

	FN1664
Description	16ga Finish Nailer
Engine Type	Oil-Free
Operation Pressure Range	70-120 PSI (4.9 to 8.43kg/cm2)
Maximum Operation Pressure	120 PSI (8.43 kg/cm2)
Fastener Type	SB16 Series
Fastener Gauge	16 Gauge
Fastener Range	1” – 2-1/2” (25mm–63mm)
Magazine Capacity	110
Length	11-7/8” (301.6mm)
Width	3-3/8” (85.7mm)
Height	11-3/8” (288.9mm)
Weight	3.9 lbs. (1.7kg)

Operating Pressure:

70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm2). Select the operating pressure within in this range for best fastener performance.

DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.

Air Consumption:

The FN1664 requires 3.9 cubic feet per minute or C.F.M. (110.4 liters per minute or LT/MIN) of free air at 80PSI (5.6 kg/cm2) to operate at a rate of 60 fasteners per minute. To determine the appropriately sized air compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN) to the compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm2).

For example, if your fastener usage averages 30 fasteners per minute, you need 50% of the tools C.F.M. required to operate the tool at the rate of 60 fasteners per minute. In this case, be sure that your air compressor can deliver a minimum of 1.90 C.F.M. (55.2 LT/MIN) at 80 PSI(5.6 kg/cm2) for optimum performance.

FASTENER SPECIFICATIONS

Tool Model	Fastener Type	Fastener SKU	Gauge	Length
FN1664		SB16-1.25	16	1-1/4” (32mm)
FN1664		SB16-1.50	16	1-1/2” (38mm)
FN1664FN1664		SB16-1.75	16	1-3/4” (45mm)
FN1664		SB16-2.00	16	2” (50mm)
	Straight Finish Nails	SB16-2.50	16	2-1/2” (63mm)

* Stainless steel fasteners also available in certain sizes. Visit www.BOSTITCH.com for further details.

NOTE:

BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting standards. BOSTITCH cannot assume responsibility for product performance if our tools are used with fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH fasteners and accessories.

-5-