Bostitch 166066REVE manual Tool Operation Check, Trigger Operated Tool, Tool Must not Cycle

Page 8

TOOL OPERATION CHECK:

CAUTION: Remove all fasteners from tool before performing tool operation check.

1.TRIGGER OPERATED TOOL:

A.With finger off the trigger, hold the tool with a firm grip on the handle.

B.Place the nose of the tool against the work surface.

C.Pull the trigger to drive. Release the trigger and cycle is complete.

CAUTION: THE TOOL WILL CYCLE EACH TIME THE TRIGGER IS PULLED!

2.CONTACT TRIP OPERATION:

A.With finger off the trigger, press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface, and pull the trigger.

THE TOOL MUST NOT CYCLE.

C.With the tool off the work surface, pull the trigger. Press the contact trip against the work surface.

THE TOOL MUST CYCLE.

D.Without touching the trigger, press the contact trip against the work surface, then pull the trigger.

THE TOOL MUST CYCLE.

3.SEQUENTIAL TRIP OPERATION:

A.Press the contact trip against the work surface, without touching the trigger.

THE TOOL MUST NOT CYCLE.

B.Hold the tool off the work surface and pull the trigger.

THE TOOL MUST NOT CYCLE.

Release the trigger. The trigger must return to the trigger stop on the frame.

C.Pull the trigger and press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

D.With finger off the trigger, press the contact trip against the work surface. Pull the trigger.

THE TOOL MUST CYCLE.

IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION

•Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.

•Never use this tool in a manner that could cause a fastener to be directed toward the user or others in the work area.

•Do not use the tool as a hammer.

•Always carry the tool by the handle. Never carry the tool by the air hose.

•Do not alter or modify this tool from the original design or function without approval from

BOSTITCH, INC.

•Always be aware that misuse and improper handling of this tool can cause injury to yourself and others.

•Never clamp or tape the trigger or contact trip in an actuated position.

•Never leave a tool unattended with the air hose attached.

•Do not operate this tool if it does not contain a legible WARNING LABEL.

•Do not continue to use a tool that leaks air or does not function properly. Notify your nearest BOSTITCH representative if your tool continues to experience functional problems.

-8-

Page 7 Page 9
Image 8
Page 7 Page 9
Contents FN16250 Introduction IndexSafety Instructions AIR Supply and ConnectionsLoading Tool OperationFN16250 Tool Specifications Fittings HosesSupply Source RegulatorLoading the FN16250 To Prevent Accidental InjuriesTool Operation Before Handling or Operating this ToolTrigger Operation Contact Trip OperationTool Operation Check Trigger Operated ToolTool Must not Cycle Tool Must CycleDIAL-A-DEPTH Fastener Control Adjustment Replacement PartsAssembly Procedure for Seals AIR SUPPLY-PRESSURE and VolumeTrouble Shooting Problem Cause CorrectionPage Nota IntroducciónÍndice Instrucciones DE Seguridad Suministro DE Aire Y ConexionesAL Cargar LA Herramienta OperaciónEspecificaciones DE LA Herramienta FN16250 Conexiones ManguerasFuente DE Suministro ReguladorCómo Cargar EL FN16250 Advertencia Para Impedir Lesiones AccidentalesOperación DE LA Herramienta Antes DE Manejar U Operar Esta HerramientaOperación DE Disparo POR Contacto Operación DE Disparo SecuencialVerificación DE LA Operación DE LA Herramienta Herramienta Operada POR GatilloOperación POR Disparo Secuencial LA Herramienta no Debe Efectuar SU CicloPresión Y Volumen DEL Suministro DE Aire Mantenimiento DE LA Herramienta NeumáticaAjuste DEL Control DE Fondo DEL Sujetador DIAL-A-DEPTH Partes DE ReemplazoProblema Causa Corrección Diagnóstico DE FallaPage Sommaire RemarqueConsignes DE Sécurité Alimentation EN AIR Comprimé ET RaccordementChargement DE L’APPAREIL FonctionnementCaractéristiques DU FN16250 OpérationRaccordements TuyauxAlimentation EN AIR Comprimé RégulateurChargement DU FN16250 Pour Prévenir UN AccidentFonctionnement DE L’APPAREIL Avant DE Manipuler OU D’UTILISER CET OutilVérification DU Système DE Déclenchement Déclenchement PAR LA DétenteSystème DE Sécurité À LA Volée Système DE Sécurité AU COUP-PAR-COUPAlimentation D’AIR Pression Volume Entretien DE L’APPAREILPièces DE Rechange Procédure D’ASSEMBLAGE DES GarnituresProblèmes DE Fonctionnement Problème Cause Correction

166066REVE specifications

The Bostitch 166066REVE is a versatile and robust electric nailer designed to enhance productivity in various woodworking and construction projects. This model stands out for its efficient performance and user-friendly features, making it a popular choice among professionals and DIY enthusiasts alike. The 166066REVE is engineered to provide a reliable solution for fastening applications, from framing to finishing.

One of the main features of the Bostitch 166066REVE is its impressive firing speed, allowing users to drive nails quickly and efficiently. This electric nailer offers a rapid-fire mode that enables users to complete projects more swiftly, which is especially beneficial for larger tasks that require substantial fastening repetition. The tool can accommodate a variety of nail sizes and types, enhancing its versatility for different applications.

The ergonomic design of the Bostitch 166066REVE ensures comfort during extended use. Its lightweight construction minimizes user fatigue, making it easier to handle throughout the day. Additionally, the handle is designed with rubber material that provides a secure grip, improving control and precision while working on intricate projects.

Equipped with advanced safety features, the 166066REVE includes a no-mar tip that protects work surfaces from scratches and dents, ensuring clean and professional results. The nailer’s safety trigger prevents accidental firing, adding another layer of security for users. The depth adjustment dial allows for precise control over the depth of nail penetration, accommodating various materials and ensuring optimal results every time.

In terms of technology, the Bostitch 166066REVE incorporates a direct drive system that delivers consistent power and performance. This system reduces the risk of misfires and helps maintain pressure for superior nail driving capabilities. Additionally, the nailer features a tool-free jam release mechanism, allowing users to quickly and easily clear any obstructions without wasting time or effort.

Overall, the Bostitch 166066REVE is a reliable electric nailer that combines speed, power, and user-friendly features. Its ergonomic design, advanced safety elements, and versatile capabilities make it an ideal choice for both amateur craftsmen and seasoned professionals. Whether tackling framing projects, cabinetry, or trim work, the Bostitch 166066REVE provides the performance and durability needed to achieve exceptional results.
Top Page Image Contents