Bostitch 166066REVE manual Loading the FN16250, To Prevent Accidental Injuries

Page 6

LOADING THE FN16250

EYE PROTECTION which conforms to ANSI specifications and provides protection against flying particles both from the FRONT and SIDE should ALWAYS be worn by the operator and others in the work area when connecting to air supply, loading, operating or servicing this tool. Eye protection is required to guard against flying fasteners and debris, which could cause severe eye injury.

The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the American National Standards Institute, ANSI Z87.1 and provide both frontal and side protection. NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.

TO PREVENT ACCIDENTAL INJURIES:

• Never place a hand or any other part of the body in nail discharge area of tool while the air supply is connected.

Never point the tool at anyone else.

Never engage in horseplay.

Never pull the trigger unless nose is directed at the work.

Always handle the tool with care.

Do not pull the trigger or depress the trip mechanism while loading the tool.

1.

2.

1.Depress magazine release button.

2.Pull back magazine.

4.

3.

3.Open magazine fully.

4.Insert fasteners, points must be against bottom of magazine.

5.

5. Push magazine forward until latch is engaged.

-6-

Image 6
Contents FN16250 Introduction IndexLoading Tool Safety InstructionsAIR Supply and Connections OperationFN16250 Tool Specifications Supply Source FittingsHoses RegulatorLoading the FN16250 To Prevent Accidental InjuriesTrigger Operation Tool OperationBefore Handling or Operating this Tool Contact Trip OperationTool Must not Cycle Tool Operation CheckTrigger Operated Tool Tool Must CycleAssembly Procedure for Seals DIAL-A-DEPTH Fastener Control AdjustmentReplacement Parts AIR SUPPLY-PRESSURE and VolumeTrouble Shooting Problem Cause CorrectionPage Introducción ÍndiceNota AL Cargar LA Herramienta Instrucciones DE SeguridadSuministro DE Aire Y Conexiones OperaciónEspecificaciones DE LA Herramienta FN16250 Fuente DE Suministro ConexionesMangueras ReguladorCómo Cargar EL FN16250 Advertencia Para Impedir Lesiones AccidentalesOperación DE Disparo POR Contacto Operación DE LA HerramientaAntes DE Manejar U Operar Esta Herramienta Operación DE Disparo SecuencialOperación POR Disparo Secuencial Verificación DE LA Operación DE LA HerramientaHerramienta Operada POR Gatillo LA Herramienta no Debe Efectuar SU CicloAjuste DEL Control DE Fondo DEL Sujetador DIAL-A-DEPTH Presión Y Volumen DEL Suministro DE AireMantenimiento DE LA Herramienta Neumática Partes DE ReemplazoProblema Causa Corrección Diagnóstico DE FallaPage Sommaire RemarqueChargement DE L’APPAREIL Consignes DE SécuritéAlimentation EN AIR Comprimé ET Raccordement FonctionnementCaractéristiques DU FN16250 OpérationAlimentation EN AIR Comprimé RaccordementsTuyaux RégulateurChargement DU FN16250 Pour Prévenir UN AccidentFonctionnement DE L’APPAREIL Avant DE Manipuler OU D’UTILISER CET OutilSystème DE Sécurité À LA Volée Vérification DU Système DE DéclenchementDéclenchement PAR LA Détente Système DE Sécurité AU COUP-PAR-COUPPièces DE Rechange Alimentation D’AIR Pression VolumeEntretien DE L’APPAREIL Procédure D’ASSEMBLAGE DES GarnituresProblèmes DE Fonctionnement Problème Cause Correction

166066REVE specifications

The Bostitch 166066REVE is a versatile and robust electric nailer designed to enhance productivity in various woodworking and construction projects. This model stands out for its efficient performance and user-friendly features, making it a popular choice among professionals and DIY enthusiasts alike. The 166066REVE is engineered to provide a reliable solution for fastening applications, from framing to finishing.

One of the main features of the Bostitch 166066REVE is its impressive firing speed, allowing users to drive nails quickly and efficiently. This electric nailer offers a rapid-fire mode that enables users to complete projects more swiftly, which is especially beneficial for larger tasks that require substantial fastening repetition. The tool can accommodate a variety of nail sizes and types, enhancing its versatility for different applications.

The ergonomic design of the Bostitch 166066REVE ensures comfort during extended use. Its lightweight construction minimizes user fatigue, making it easier to handle throughout the day. Additionally, the handle is designed with rubber material that provides a secure grip, improving control and precision while working on intricate projects.

Equipped with advanced safety features, the 166066REVE includes a no-mar tip that protects work surfaces from scratches and dents, ensuring clean and professional results. The nailer’s safety trigger prevents accidental firing, adding another layer of security for users. The depth adjustment dial allows for precise control over the depth of nail penetration, accommodating various materials and ensuring optimal results every time.

In terms of technology, the Bostitch 166066REVE incorporates a direct drive system that delivers consistent power and performance. This system reduces the risk of misfires and helps maintain pressure for superior nail driving capabilities. Additionally, the nailer features a tool-free jam release mechanism, allowing users to quickly and easily clear any obstructions without wasting time or effort.

Overall, the Bostitch 166066REVE is a reliable electric nailer that combines speed, power, and user-friendly features. Its ergonomic design, advanced safety elements, and versatile capabilities make it an ideal choice for both amateur craftsmen and seasoned professionals. Whether tackling framing projects, cabinetry, or trim work, the Bostitch 166066REVE provides the performance and durability needed to achieve exceptional results.