FN16250 Tool Specifications

All screws and nuts are metric.

MODEL	LENGTH	HEIGHT	WIDTH	WEIGHT
FN16250	12-3/8” (314mm)	10-1/2” (266.7mm)	3-1/16” (77.8mm)	3.3lbs (1.50kg)

FASTENER SPECIFICATIONS:

TOOL MODEL	NAIL SERIES	GAUGE	WIRE SIZE	FASTENER RANGE
FN16250	SB16	16	.054 X .065 (1.37mm X 1.65mm)	1”- 2-1/2” (25mm-63mm)

TOOL AIR FITTING:

This tool uses a 1/4” N.P.T. male plug. The inside diameter should be .200” (5mm) or larger. The fitting must be capable of discharging tool air pressure when disconnected from the air supply.

OPERATING PRESSURE:

70 to 120 p.s.i.g. (4.9 to 8.4 kg/cm2 ). Select the operating pressure within this range for best fastener performance. DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.

AIR CONSUMPTION:

Model FN16250 requires 3.1 cubic feet per minute of free air to operate at the rate of 60 fasteners per minute, at 80 p.s.i.g. To calculate the actual rate at which the tool will be run to determine the amount of air required, for example; if your usage averages 30 fasteners per minute, you need 50% of the 3.1 c.f.m. which is required for running at 60 fasteners per minute.

OPERATION

BOSTITCH OFFERS THREE TYPES OF OPERATION FOR THIS SERIES TOOL.

CONTACT TRIP:

The common operating procedure on “Contact Trip” tools is for the operator to contact the work to actuate the trip mechanism while keeping the trigger pulled, thus driving a fastener each time the work is contacted. This will allow rapid fastener placement on many jobs, such as sheathing, decking and pallet assembly. All pneumatic tools are subject to recoil when driving fasteners. The tool may bounce, releasing the trip, and if unintentionally allowed to recontact the work surface with the trigger still actuated (finger still holding trigger pulled) an unwanted second fastener will be driven.

SEQUENTIAL TRIP:

The Sequential Trip requires the operator to hold the tool against the work before pulling the trigger. This makes accurate fastener placement easier, for instance on framing, toe nailing and crating applications.The Sequential Trip allows exact fastener location without the possibility of driving a second fastener on recoil, as described under “Contact Trip”. The Sequential Trip Tool has a positive safety advantage because it will not accidentally drive a fastener if the tool is contacted against the work – or anything else – while the operator is holding the trigger pulled.

TRIGGER OPERATED:

The Trigger Operated model is cycled by actuation of the trigger only. This model does not have a Contact Arm and is intended for use only where a Contact Arm CANNOT be used to satify the requirements of the application. The Trigger Operated tool will cycle each time the trigger is actuated.

MODEL IDENTIFICATION:

Refer to Operation Instructions on page 7 before proceeding to use this tool.

CONTACT TRIP	SEQUENTIAL TRIP	TRIGGER OPERATED
Identified by:	Identified by:	Identified by:
BLACK TRIGGER	GRAY TRIGGER	BLACK TRIGGER

-4-

166066REVE specifications

The Bostitch 166066REVE is a versatile and robust electric nailer designed to enhance productivity in various woodworking and construction projects. This model stands out for its efficient performance and user-friendly features, making it a popular choice among professionals and DIY enthusiasts alike. The 166066REVE is engineered to provide a reliable solution for fastening applications, from framing to finishing.

One of the main features of the Bostitch 166066REVE is its impressive firing speed, allowing users to drive nails quickly and efficiently. This electric nailer offers a rapid-fire mode that enables users to complete projects more swiftly, which is especially beneficial for larger tasks that require substantial fastening repetition. The tool can accommodate a variety of nail sizes and types, enhancing its versatility for different applications.

The ergonomic design of the Bostitch 166066REVE ensures comfort during extended use. Its lightweight construction minimizes user fatigue, making it easier to handle throughout the day. Additionally, the handle is designed with rubber material that provides a secure grip, improving control and precision while working on intricate projects.

Equipped with advanced safety features, the 166066REVE includes a no-mar tip that protects work surfaces from scratches and dents, ensuring clean and professional results. The nailer’s safety trigger prevents accidental firing, adding another layer of security for users. The depth adjustment dial allows for precise control over the depth of nail penetration, accommodating various materials and ensuring optimal results every time.

In terms of technology, the Bostitch 166066REVE incorporates a direct drive system that delivers consistent power and performance. This system reduces the risk of misfires and helps maintain pressure for superior nail driving capabilities. Additionally, the nailer features a tool-free jam release mechanism, allowing users to quickly and easily clear any obstructions without wasting time or effort.

Overall, the Bostitch 166066REVE is a reliable electric nailer that combines speed, power, and user-friendly features. Its ergonomic design, advanced safety elements, and versatile capabilities make it an ideal choice for both amateur craftsmen and seasoned professionals. Whether tackling framing projects, cabinetry, or trim work, the Bostitch 166066REVE provides the performance and durability needed to achieve exceptional results.