Hobart Welding Products Comprehensive Hobart Manual, Parts Diagrams, and Serial Number Lookup for 210 MVP

5-10. Serial Number And Rating Label Location

The serial number and rating information for this product is located on back. Use rating label to determine input power requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.

5-11. Selecting A Location And Connecting Input Power

18 in. (457 mm) of space for airflow

1

! Do not move or operate

unit where it could tip.

34

5 6

78

2

Align arrows before threading together

250 332-A

! Do Not modify or rewire receptacle

connection.

! Do Not cut off power cord connector and rewire. The power cord connector and plugs will work with standard NEMA receptacles. Modifying power cord, connector, and plugs will void product warranty.

! Special installation may be required where gasoline or volatile liquids are present − see NEC Article 511 or CEC Section 20.

For 115 VAC input power, a 20 ampere individual branch circuit protected by time-delay fuses or circuit breaker is required, see Section 5-13. For 230 VAC input power, see Section 5-12.

1 Rating Label

Supply correct input power (see Section 5-10).

2Power Cord Connector

3Plug − NEMA Type 5-15P

4Receptacle − NEMA Type 5-15R (Customer Supplied)

5Plug − NEMA Type 5-20P (Optional)

6Receptacle NEMA Type 5-20R (Customer Supplied)

7Plug − NEMA Type 6-50P

8Receptacle − NEMA Type 6-50R (Customer Supplied)

Select plug for power supply receptacle available at site. Install plug onto power cord adapter. As threaded collar is tightened, push plug onto adapter until collar is completely tight.

Connect plug to receptacle.

OM-249 498 Page 21