Grizzly G0601 owner manual Assembly

Assembly

The Model G0442/G0601 is a heavy machine. Serious personal injury may occur if safe moving methods are not used. To be safe, get assistance and use power equip- ment to move the ship- ping crate and remove the machine from the crate.

To assemble the dust collector:

1.Connect the upper stand legs with the lower stand braces, using (16) 3⁄8"-16 x 3⁄4" hex bolts,

(32)3⁄8" flat washers, and (16) 3⁄8"-16 lock nuts (see Figure 12).

Note: Do not fully tighten the fasteners for now.

x 16

Figure 12. Initial assembly of upper stand legs

connected to lower stand braces.

-24-

2.Attach the upper stand braces to the top of the assembly from Step 1, using (16) 3⁄8"-16 x 3⁄4" hex bolts, (32) 3⁄8" flat washers, and (16) 3⁄8"-16 lock nuts, as shown in Figure 13.

Note: Do not fully tighten the fasteners for now.

x 16

Figure 13. Upper braces attached to stand

assembly.

3.Square up the stand, as shown in Figure 14, then tighten all the bolts.

Figure 14. Squaring stand assembly before

tightening stand hardware.

Model G0442/G0601 (Mfg Since 8/10)