Troubleshooting Flow Charts
Heater Fails to Operate
Analog Controls - 12/22/03
START
Is the thermostat turned UP,
|
| and the toggle or rocker switch |
|
|
Yes |
|
| No | |
|
| |||
|
| selecting either the |
|
|
|
|
|
| |
|
| SPA or POOL |
|
|
|
| thermostat ? |
|
|
Check to be sure the power light is on. If the power light is off, check for a tripped circuit breaker. Reset the circuit breaker if necessary.
Yes | Is the heater | |
operating correctly? | ||
|
Position controls to
select POOL or SPA;
rotate selected
thermostat to the maximum setting.
No
Check to see that the pool pump is operating and the flow light is on.
Make sure all water
valves are in the correct
position and the filter and pump basket are clean.
|
| Is the heater |
|
|
Yes |
| No | ||
| operating correctly? |
| ||
|
|
|
|
The heater is equipped with a five minute delay.
Wait at least five
minutes to allow the
timer to reset.
Problem
Solved.
to desired
temperature)
Yes | Is the unit operating | |
correctly? | ||
| ||
| No |
Contact
AquaCal for
Assistance at:
30