Kenmore 153.33262 Fire or Explosion Hazard, Fire Hazard, Breathing Hazard Carbon Monoxide Gas

Page 3

Read and understand instruction

manual and safety messages before installing, operating or

servicing this water heater. Failure to follow instructions and safety messages could result in

death or serious injury. Instruction manual must remain with water heater.

J7-'I[el=l=!Water temperature over 125°F (52°C) can cause severe burns

instantly resulting in severe injury or death.

Children, the elderly, and the physically or mentally disabled are at highest riskforscald injury.

Feel water before bathing or showering.

Temperature limiting valves are available.

Read instruction manual for safe temperature setting.

Fire or Explosion Hazard

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Avoid all ignition sources if you smell Natural or LP gas.

Do not expose water heater control to excessive gas pressure.

Use only gas shown on rating plate.

Maintain required clearances to combustibles.

Keep ignition sources away from faucets after extended period of non-use.

installing, using or servicing

water heater.

Read instruction manual before

Fire Hazard

For continued protection against riskof fire:

Do not install water heater on carpeted floor.

Do not operate water heater if flood damaged.

Explosion Hazard

°Overheated water can cause watertank explosion.

°Properly sized temperature and pressure relief valve must

be installed in opening provided.

Breathing Hazard - Carbon Monoxide Gas

Install vent system in accordance with codes.

Do not operate water heater if flood damaged

Heater should not be installed for High Altitude operation above 10,100 feet (3,078 m).

Do not operate if soot buildup.

Do not obstruct water heater air intake with insulating jacket.

Do not place chemical vapor emitting products near water heater.

Gas and carbon monoxide detectors are available.

Breathing carbon monoxide can cause brain damage or death. Always read and understand instruction manual.

Improper installation and use may result in property damage.

Do not operate water heater if flood damaged.

Install in location with drainage.

Fill tank with water before operation.

Be alert for thermal expansion.

Refer to instruction manual for installation and service.

Image 3
Contents 317997-000 =I=€di,lldImportant Definitions Read and follow water heater warnings and instructionsExplosion Hazard Improper installation and use may result in property damageFire or Explosion Hazard Fire HazardGet to know your Water Heater InstallationClearances Accessibility High Altitude Installation Vent Connectors ChimneyPoweredAnodeRodOperation ElectricalConnections SolarInstallation WiringDiagramMaster Protection Agreements Sears Installation ServiceImportant Information About This Water Heater Excessive Weight Hazard153.332620 Natural 40,000 42.6153.332640 189 Natural 40,000 42.6 376or4102 559 57.13 1451 Materials Needed Pressure Relief Valve SwitchTransformer Gas Supply PipingVent Pipe System Installation ChecklistWater Heater Location Combustion Air Supply and VentilationManualgas Removing the Old Water HeaterSensor Location RequirementsSite Location Carbon Monoxide Poisoning HazardHigh Altitude Installation Pmpey Damage HazardMinimum Clearance Locations Explosion Hazard Gas Pressure TestingGas Pressure Gas Requirements Gas PipingAtuml Gas Pipe Capacity Table Cue FtJHr Gas Pipe Capacity TableUnconfined Space Confined SpaceCarbon Monoxide Warning Minimum Free All Air from the BuildingLouvers and Grilles All Air from OutdoorsDraft Hood Installation Vent Pipe SystemAll Air from Outdoors Through Ventilated Attic Vertical Exhaust Gas Vent Vent ConnectorsVent Pipe Size Chimney ConnectionVenting Gas Vent System With Type B Double Wall Vent Pipe Piping InstallationClosed System/Thermal Expansion Pmpey Damage Hazard Temperature and Pressure Relief ValveTemperature Pressure Relief Valve Relief Valve and Pipe InsulationDischarge Line Electrical Connections Solar InstallationReplace view port if glass is missing Or damaged Manual before changing temperatureOperating Instructions Failure to do so can result in death Explosion or fireDo not touch vent Doing so can result in burns Water Heater OperationChecking the Draft Burn HazardRegulation Water TemperatureBurner Flames Emergency Shut DownPowered Anode Operation Powered Anode SystemHotter J Temperature and Pressure Relief Valve Explosion Harzard Routine Preventive MaintenanceDraining and Flushing Replacing the Flame Sense/Hot Surface igniter Assembly Replacement PartsRemoving the Burner from the Manifold/ Burner Assembly Removing the Manifold/Burner AssemblyReplacing the Manifold/Burner Assembly Cleaning the Combustion Chamber and Air Diverter AssemblyRemoving and Replacing the Gas Control Valve/Thermostat Door Gasket Burner ISlot ViewportReplacing the Gas Valve Start Up Conditions AIR In Hot Water Faucets Safety Shut-off and Thermal SwitchCondensation Smoke OdorLeakage Checkpoints Possible Causes Pressurized Combustion Chamber System Operational ChecklistCorrective Action Power IGN Heating Clean SW, OPEN, and Clean Screen Flashing Open YES Pressurized Combustion Chamber Key Parts Description153.332620 153.332640 Page Managemylife
Related manuals
Manual 44 pages 10.06 Kb

153.33262, 153.33264 specifications

The Kenmore 153.33262 and 153.33264 are highly versatile and efficient portable air conditioners designed to provide optimal cooling solutions for indoor spaces. These models stand out in their class due to their advanced features, technologies, and user-friendly characteristics, making them suitable for a variety of environments, from small apartments to large rooms.

One of the primary features of both the Kenmore 153.33262 and 153.33264 is their high cooling capacity. With powerful BTUs, they can effectively cool spaces up to a specified square footage. This capability ensures that users can maintain a comfortable indoor climate even during the hottest summer months. Their energy efficiency is another notable aspect, allowing homeowners to enjoy cooler air without incurring exorbitant energy bills.

The two models are equipped with various modes of operation, including cooling, fan, and dehumidifying modes. This multifunctionality allows users to customize their comfort based on prevailing weather conditions. For instance, the dehumidifying mode effectively reduces excess moisture in the air, creating a more comfortable environment, particularly in humid regions.

Both air conditioners come with a user-friendly digital interface that features an easy-to-read LED display. The interface allows for straightforward adjustments to the temperature, fan speed, and operating modes. Furthermore, remote control functionality enhances convenience, enabling users to change settings from across the room.

In terms of technology, these models incorporate a self-evaporating system that minimizes the need for manual water drainage. This feature is particularly advantageous for users who prefer low-maintenance options. Additionally, both units feature a washable air filter, designed to capture dust and allergens, improving air quality and ensuring that the units operate efficiently.

Portability is another significant characteristic of the Kenmore 153.33262 and 153.33264. Built-in caster wheels and side handles allow for easy movement from room to room, making them ideal for temporary cooling needs. The easy installation process and included window exhaust kit mean users can set up the units quickly without requiring professional assistance.

In conclusion, the Kenmore 153.33262 and 153.33264 portable air conditioners offer a robust combination of high cooling performance, energy efficiency, and user-friendly features. Their advanced technologies and versatile functionalities make them an ideal choice for those seeking effective indoor air conditioning solutions.