Specifications, English Original instructions

ENGLISH (Original instructions)

SPECIFICATIONS

Model		HR2800	HR2810	HR2810T	HR2811F	HR2811FT
	Concrete			28 mm (1-1/8")
Capacities	Core bit			80 mm (3-1/8")
Capacities	Steel			13 mm (1/2")
	Steel			13 mm (1/2")
	Wood			32 mm (1-1/4")
No load speed (RPM)				0 - 1,100/min.
Blows per minute				0 - 4,500
Overall length		314 mm (12-3/8")		339 mm (13-3/8")	320 mm (12-5/8")	345 mm (13-5/8")
Net weight		3.4 kg ( 7.4 lbs)	3.4 kg ( 7.5 lbs)	3.5 kg (7.8 lbs)	3.5 kg (7.7 lbs)	3.6 kg (8.0 lbs)

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003

GEA008-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while

operating a power tool. Distractions can cause you to lose control.

Electrical Safety

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

9.If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.

Personal Safety

10.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

11.Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

12.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. . Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

13.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

HR2811FT, HR2810, HR2800, HR2811F, HR2810T specifications

The Makita HR2811F is a powerful and efficient rotary hammer drill that’s designed for heavy-duty applications, making it a valuable tool for both professionals and DIY enthusiasts. This model stands out with its robust construction and advanced features that ensure maximum performance and durability.

One of the key features of the HR2811F is its powerful 800-watt motor, which delivers an impact energy of up to 2.9 Joules. This impressive power allows the drill to handle even the toughest materials, including concrete and masonry, with ease. The hammer drill is equipped with a dual-mode operation, allowing users to switch between hammering and rotary drilling, making it versatile for various tasks.

The HR2811F incorporates an advanced anti-vibration technology (AVT), which minimizes hand fatigue and enhances user comfort during prolonged use. This technology consists of a counterbalance system that absorbs vibrations, ensuring that the tool operates smoothly and efficiently. Additionally, the soft-grip handle provides added comfort, making it easier to handle while reducing the risk of slips.

Another notable characteristic of the Makita HR2811F is its optimized dust sealing system, which protects the internal components from dust and debris. This feature significantly enhances the tool's lifespan and reliability, especially when working in challenging environments. The drill is also designed for easy bit changes, with a quick-change chuck system that allows for the rapid exchange of SDS-plus bits.

The HR2811F is equipped with a variable speed control feature that offers users the ability to adjust the speed according to the task at hand. This flexibility is crucial when working on different materials, as it allows for greater precision and improved results. The tool’s lightweight design, combined with its ergonomic shape, makes it easy to maneuver and ideal for overhead applications.

In summary, the Makita HR2811F is a top-tier rotary hammer drill that combines power, comfort, and versatility. With its strong motor, anti-vibration technology, and dust sealing system, it is perfectly suited for demanding tasks in construction and renovation. Whether you're drilling into concrete, brick, or rock, the HR2811F delivers exceptional performance that professionals and hobbyists alike can rely on.