Makita HR2811FT, HR2800, HR2810T Installing or removing the bit, Depth gauge, Dust cup

Page 7

Installing or removing the bit

the O symbol. Turn the bit to the desired angle.

Rotate the action mode changing knob to the symbol. Then make sure that the bit is securely held in place by

1 2

003150

1. Bit shank

2. Bit grease

turning it slightly.

 

1. Action mode

1

changing knob

 

Clean the bit shank and apply bit grease before installing the bit.

008208

1

2

008210

1.Bit

2.Chuck cover

Depth gauge

1. Depth gauge

1

Insert the bit into the tool. Turn the bit and push it in until it engages.

After installing, always make sure that the bit is securely held in place by trying to pull it out.

To remove the bit, pull the chuck cover down all the way and pull the bit out.

008212

The depth gauge is convenient for drilling holes of uniform depth. Loosen the side grip and insert the depth gauge into the hole in the side grip. Adjust the depth gauge to the desired depth and tighten the side grip.

1

2

008211

1.Bit

2.Chuck cover

NOTE:

•The depth gauge cannot be used at the position where the depth gauge strikes against the gear housing.

Dust cup

1. Dust cup

1

Bit angle (when chipping, scaling or demolishing)

For models HR2810, HR2810T, HR2811F, HR2811FT

1. Action mode changing knob

1

008237

The bit can be secured at the desired angle. To change the bit angle, rotate the action mode changing knob to

001300

Use the dust cup to prevent dust from falling over the tool and on yourself when performing overhead drilling operations. Attach the dust cup to the bit as shown in the figure. The size of bits which the dust cup can be attached to is as follows.

 

Bit diameter

Dust cup 5

6 mm (1/4") - 14.5 mm (9/16")

 

 

Dust cup 9

12 mm (15/32") - 16 mm (5/8")

006386

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Rotary Hammer Marteau Perforateur Martillo Rotativo English Original instructions SpecificationsMinimum gage for cord Ampere Rating Volts Rotary Hammer Safety Warnings120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Functional Description Switch actionChanging the quick change chuck for SDS-plus Reversing switch actionSelecting the action mode Lighting up the lampsBit grease AssemblyTorque limiter Side grip auxiliary handleDust cup Installing or removing the bitBit angle when chipping, scaling or demolishing Depth gaugeChipping/Scaling/Demolition Blow-out bulb optional accessoryOperation Hammer drilling operationFor Model HR2800, HR28010, HR2810F MaintenanceAccessories Diamond core drillingWarranty Policy Makita Limited ONE Year WarrantySpécifications Français Mode d’emploi originalSécurité personnelle Que celles prévues peut entraîner une situation dangereuse Consignes DE Sécurité Pour Marteau Rotatif Conservez CE Mode DemploiPour les modèles HR2811F et HR2811FT Description DU FonctionnementInterrupteur Allumage de la lampe InverseurChanger le mandrin à adaptateur rapide pour SDS-plus Sélection du mode de fonctionnementGraisse rose Installation et retrait du emboutAssemblage Poignée latérale poignée auxiliaireCollecteur de poussières Gabarit de profondeurPour les modèles HR2810, HR2810T, HR2811F et HR2811FT Burinage / Ecaillage / Démolition Poire soufflante accessoire en optionUtilisation Perçage avec martelageEntretien AccessoiresPerforation au diamant Politique de garantie Garantie Limitée D’UN AN MakitaEspañol Instrucciones originales EspecificacionesPage 12 a Advertencia DE Seguridad Para USO DEL Martillo RotativoGuarde Estas Instrucciones Más de No más de Calibre del cable AWG 10 aPara modelos HR2811F, HR2811FT Descripción DEL FuncionamientoAccionamiento del interruptor Encendido de la lámpara Accionamiento del conmutador de inversión de giroSelección del modo de accionamiento Cambio del mandril de cambio rápido para SDS-plusGrasa para brocas EnsambleEmpuñadura lateral auxiliar Limitador de torsiónPara modelos HR2810, HR2810T, HR2811F, HR2811FT Calibrador de profundidadÁngulo de cincel al cortar, demoler o tallar Contenedor de polvo opcionalCincelado/Tallado/Demolición OperaciónOperación de taladrado con percusión Soplador Accesorio opcionalPara modelos HR2800, HR28010, HR2810F MantenimientoAccesorios Perforación con corona diamantadaPolítica de garantía Page Advertencia
Related manuals
Manual 3 pages 4.86 Kb

HR2811FT, HR2810, HR2800, HR2811F, HR2810T specifications

The Makita HR2811F is a powerful and efficient rotary hammer drill that’s designed for heavy-duty applications, making it a valuable tool for both professionals and DIY enthusiasts. This model stands out with its robust construction and advanced features that ensure maximum performance and durability.

One of the key features of the HR2811F is its powerful 800-watt motor, which delivers an impact energy of up to 2.9 Joules. This impressive power allows the drill to handle even the toughest materials, including concrete and masonry, with ease. The hammer drill is equipped with a dual-mode operation, allowing users to switch between hammering and rotary drilling, making it versatile for various tasks.

The HR2811F incorporates an advanced anti-vibration technology (AVT), which minimizes hand fatigue and enhances user comfort during prolonged use. This technology consists of a counterbalance system that absorbs vibrations, ensuring that the tool operates smoothly and efficiently. Additionally, the soft-grip handle provides added comfort, making it easier to handle while reducing the risk of slips.

Another notable characteristic of the Makita HR2811F is its optimized dust sealing system, which protects the internal components from dust and debris. This feature significantly enhances the tool's lifespan and reliability, especially when working in challenging environments. The drill is also designed for easy bit changes, with a quick-change chuck system that allows for the rapid exchange of SDS-plus bits.

The HR2811F is equipped with a variable speed control feature that offers users the ability to adjust the speed according to the task at hand. This flexibility is crucial when working on different materials, as it allows for greater precision and improved results. The tool’s lightweight design, combined with its ergonomic shape, makes it easy to maneuver and ideal for overhead applications.

In summary, the Makita HR2811F is a top-tier rotary hammer drill that combines power, comfort, and versatility. With its strong motor, anti-vibration technology, and dust sealing system, it is perfectly suited for demanding tasks in construction and renovation. Whether you're drilling into concrete, brick, or rock, the HR2811F delivers exceptional performance that professionals and hobbyists alike can rely on.
Top Page Image Contents