Makita HR2810, HR2800, HR2811FT Assembly, Torque limiter, Side grip auxiliary handle, Bit grease

Page 6

For rotation with hammering, turn the knob so that the arrow on the knob points toward thesymbol on the tool body.

CAUTION:

•Always set the knob fully to your desired mode symbol. If you operate the tool with the knob positioned halfway between the mode symbols, the tool may be damaged.

•Use the knob after the tool comes to a complete stop.

For models HR2810, HR2810T, HR2811F, HR2811FT Rotation with hammering

CAUTION:

•Do not rotate the action mode changing knob when the tool is running under load. The tool will be damaged.

•To avoid rapid wear on the mode change mechanism, be sure that the action mode changing knob is always positively located in one of the three action mode positions.

Torque limiter

The torque limiter will actuate when a certain torque level is reached. The motor will disengage from the output shaft. When this happens, the bit will stop turning.

1

008206

1.Action mode changing knob

CAUTION:

•As soon as the torque limiter actuates, switch off the tool immediately. This will help prevent premature wear of the tool.

•Bits such as hole saw, which tend to pintch or catch easily in the hole, are not appropriate for this tool. This is because they will cause the torque limiter to actuate too frequently.

For drilling in concrete, masonry, etc., rotate the action

mode changing knob to the symbol. Use a tungsten-carbide tipped bit.

Rotation only

 

1. Action mode

1

changing knob

 

ASSEMBLY

CAUTION:

•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

Side grip (auxiliary handle)

1 3

1.Grip base

2.Side grip

3.Teeth

4.Protrusion

008207

For drilling in wood, metal or plastic materials, lock button and rotate the action mode changing knob to the symbol. Use a twist drill bit or wood bit.

Hammering only

2

008209

4

 

1. Action mode

1

changing knob

 

 

 

008208

For chipping, scaling or demolition operations, rotate the

action mode changing knob to the symbol. Use a bull point, cold chisel, scaling chisel, etc.

CAUTION:

•Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in between the protrusions on the tool barrel. Then tighten the grip by turning clockwise at the desired position. It may be swung 360° so as to be secured at any position.

Bit grease

Coat the bit shank head beforehand with a small amount of bit grease (about 0.5 - 1 g).

This chuck lubrication assures smooth action and longer service life.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Rotary Hammer Marteau Perforateur Martillo Rotativo Specifications English Original instructionsRotary Hammer Safety Warnings Minimum gage for cord Ampere Rating Volts120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Switch action Functional DescriptionLighting up the lamps Reversing switch actionSelecting the action mode Changing the quick change chuck for SDS-plusSide grip auxiliary handle AssemblyTorque limiter Bit greaseDepth gauge Installing or removing the bitBit angle when chipping, scaling or demolishing Dust cupHammer drilling operation Blow-out bulb optional accessoryOperation Chipping/Scaling/DemolitionDiamond core drilling MaintenanceAccessories For Model HR2800, HR28010, HR2810FMakita Limited ONE Year Warranty Warranty PolicyFrançais Mode d’emploi original SpécificationsSécurité personnelle Que celles prévues peut entraîner une situation dangereuse Conservez CE Mode Demploi Consignes DE Sécurité Pour Marteau RotatifInverseur Description DU FonctionnementInterrupteur Allumage de la lampe Pour les modèles HR2811F et HR2811FTSélection du mode de fonctionnement Changer le mandrin à adaptateur rapide pour SDS-plusPoignée latérale poignée auxiliaire Installation et retrait du emboutAssemblage Graisse roseGabarit de profondeur Collecteur de poussièresPour les modèles HR2810, HR2810T, HR2811F et HR2811FT Perçage avec martelage Poire soufflante accessoire en optionUtilisation Burinage / Ecaillage / DémolitionAccessoires EntretienPerforation au diamant Garantie Limitée D’UN AN Makita Politique de garantieEspecificaciones Español Instrucciones originalesPage Más de No más de Calibre del cable AWG 10 a Advertencia DE Seguridad Para USO DEL Martillo RotativoGuarde Estas Instrucciones 12 aAccionamiento del conmutador de inversión de giro Descripción DEL FuncionamientoAccionamiento del interruptor Encendido de la lámpara Para modelos HR2811F, HR2811FTCambio del mandril de cambio rápido para SDS-plus Selección del modo de accionamientoLimitador de torsión EnsambleEmpuñadura lateral auxiliar Grasa para brocasContenedor de polvo opcional Calibrador de profundidadÁngulo de cincel al cortar, demoler o tallar Para modelos HR2810, HR2810T, HR2811F, HR2811FTSoplador Accesorio opcional OperaciónOperación de taladrado con percusión Cincelado/Tallado/DemoliciónPerforación con corona diamantada MantenimientoAccesorios Para modelos HR2800, HR28010, HR2810FPolítica de garantía Page Advertencia
Related manuals
Manual 3 pages 4.86 Kb

HR2811FT, HR2810, HR2800, HR2811F, HR2810T specifications

The Makita HR2811F is a powerful and efficient rotary hammer drill that’s designed for heavy-duty applications, making it a valuable tool for both professionals and DIY enthusiasts. This model stands out with its robust construction and advanced features that ensure maximum performance and durability.

One of the key features of the HR2811F is its powerful 800-watt motor, which delivers an impact energy of up to 2.9 Joules. This impressive power allows the drill to handle even the toughest materials, including concrete and masonry, with ease. The hammer drill is equipped with a dual-mode operation, allowing users to switch between hammering and rotary drilling, making it versatile for various tasks.

The HR2811F incorporates an advanced anti-vibration technology (AVT), which minimizes hand fatigue and enhances user comfort during prolonged use. This technology consists of a counterbalance system that absorbs vibrations, ensuring that the tool operates smoothly and efficiently. Additionally, the soft-grip handle provides added comfort, making it easier to handle while reducing the risk of slips.

Another notable characteristic of the Makita HR2811F is its optimized dust sealing system, which protects the internal components from dust and debris. This feature significantly enhances the tool's lifespan and reliability, especially when working in challenging environments. The drill is also designed for easy bit changes, with a quick-change chuck system that allows for the rapid exchange of SDS-plus bits.

The HR2811F is equipped with a variable speed control feature that offers users the ability to adjust the speed according to the task at hand. This flexibility is crucial when working on different materials, as it allows for greater precision and improved results. The tool’s lightweight design, combined with its ergonomic shape, makes it easy to maneuver and ideal for overhead applications.

In summary, the Makita HR2811F is a top-tier rotary hammer drill that combines power, comfort, and versatility. With its strong motor, anti-vibration technology, and dust sealing system, it is perfectly suited for demanding tasks in construction and renovation. Whether you're drilling into concrete, brick, or rock, the HR2811F delivers exceptional performance that professionals and hobbyists alike can rely on.
Top Page Image Contents