Makita HR2800, HR2810 Lighting up the lamps, Reversing switch action, Selecting the action mode

Page 5

Lighting up the lamps

Removing the quick change chuck for SDS-plus

For Models HR2811F, HR2811FT

1. Lamp

1

1

2 3

008233

1.Quick change chuck for SDS-plus

2.Change cover line

3.Change cover

008235

CAUTION:

•Do not look in the light or see the source of light directly.

To turn on the lamp, pull the trigger. Release the trigger to turn it off.

NOTE:

CAUTION:

•Before removing the quick change chuck for

SDS-plus, always remove the bit.

Grasp the change cover of the quick change chuck for SDS-plus and turn in the direction of the arrow until the change cover line moves from the symbol to the symbol. Pull forcefully in the direction of the arrow.

Attaching the quick change drill chuck

•Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination.

Reversing switch action

 

 

1. Reversing

B

A

switch lever

 

1

 

2 1

4

3

008234

1.Spindle

2.Quick change drill chuck

3.Change cover line

4.Change cover

008205

This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation.

CAUTION:

•Always check the direction of rotation before operation.

•Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.

•When you operate the tool in counterclockwise rotation, the switch trigger is pulled only halfway and the tool runs at half speed.

Changing the quick change chuck for SDS-plus

For model HR2810T, HR2811FT

The quick change chuck for SDS-plus can be easily exchanged for the quick change drill chuck.

Check the line of the quick change drill chuck shows the

symbol. Grasp the change cover of the quick change drill chuck and set the line to the symbol.

Place the quick change drill chuck on the spindle of the tool.

Grasp the change cover of the quick change drill chuck and turn the change cover line to the symbol until a click can clearly be heard.

Selecting the action mode

For Model HR2800

1. Action mode changing knob

1

008236

This tool employs an action mode changing knob. Select one of the two modes suitable for your work needs by using this knob.

For rotation only, turn the knob so that the arrow on the knob points toward the symbol on the tool body.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Rotary Hammer Marteau Perforateur Martillo Rotativo English Original instructions Specifications120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Rotary Hammer Safety WarningsMinimum gage for cord Ampere Rating Volts Functional Description Switch actionSelecting the action mode Reversing switch actionLighting up the lamps Changing the quick change chuck for SDS-plusTorque limiter AssemblySide grip auxiliary handle Bit greaseBit angle when chipping, scaling or demolishing Installing or removing the bitDepth gauge Dust cupOperation Blow-out bulb optional accessoryHammer drilling operation Chipping/Scaling/DemolitionAccessories MaintenanceDiamond core drilling For Model HR2800, HR28010, HR2810FWarranty Policy Makita Limited ONE Year WarrantySécurité personnelle Français Mode d’emploi originalSpécifications Que celles prévues peut entraîner une situation dangereuse Consignes DE Sécurité Pour Marteau Rotatif Conservez CE Mode DemploiInterrupteur Allumage de la lampe Description DU FonctionnementInverseur Pour les modèles HR2811F et HR2811FTChanger le mandrin à adaptateur rapide pour SDS-plus Sélection du mode de fonctionnementAssemblage Installation et retrait du emboutPoignée latérale poignée auxiliaire Graisse rosePour les modèles HR2810, HR2810T, HR2811F et HR2811FT Gabarit de profondeurCollecteur de poussières Utilisation Poire soufflante accessoire en optionPerçage avec martelage Burinage / Ecaillage / DémolitionPerforation au diamant AccessoiresEntretien Politique de garantie Garantie Limitée D’UN AN MakitaEspañol Instrucciones originales EspecificacionesPage Guarde Estas Instrucciones Advertencia DE Seguridad Para USO DEL Martillo RotativoMás de No más de Calibre del cable AWG 10 a 12 aAccionamiento del interruptor Encendido de la lámpara Descripción DEL FuncionamientoAccionamiento del conmutador de inversión de giro Para modelos HR2811F, HR2811FTSelección del modo de accionamiento Cambio del mandril de cambio rápido para SDS-plusEmpuñadura lateral auxiliar EnsambleLimitador de torsión Grasa para brocasÁngulo de cincel al cortar, demoler o tallar Calibrador de profundidadContenedor de polvo opcional Para modelos HR2810, HR2810T, HR2811F, HR2811FTOperación de taladrado con percusión OperaciónSoplador Accesorio opcional Cincelado/Tallado/DemoliciónAccesorios MantenimientoPerforación con corona diamantada Para modelos HR2800, HR28010, HR2810FPolítica de garantía Page Advertencia
Related manuals
Manual 3 pages 4.86 Kb

HR2811FT, HR2810, HR2800, HR2811F, HR2810T specifications

The Makita HR2811F is a powerful and efficient rotary hammer drill that’s designed for heavy-duty applications, making it a valuable tool for both professionals and DIY enthusiasts. This model stands out with its robust construction and advanced features that ensure maximum performance and durability.

One of the key features of the HR2811F is its powerful 800-watt motor, which delivers an impact energy of up to 2.9 Joules. This impressive power allows the drill to handle even the toughest materials, including concrete and masonry, with ease. The hammer drill is equipped with a dual-mode operation, allowing users to switch between hammering and rotary drilling, making it versatile for various tasks.

The HR2811F incorporates an advanced anti-vibration technology (AVT), which minimizes hand fatigue and enhances user comfort during prolonged use. This technology consists of a counterbalance system that absorbs vibrations, ensuring that the tool operates smoothly and efficiently. Additionally, the soft-grip handle provides added comfort, making it easier to handle while reducing the risk of slips.

Another notable characteristic of the Makita HR2811F is its optimized dust sealing system, which protects the internal components from dust and debris. This feature significantly enhances the tool's lifespan and reliability, especially when working in challenging environments. The drill is also designed for easy bit changes, with a quick-change chuck system that allows for the rapid exchange of SDS-plus bits.

The HR2811F is equipped with a variable speed control feature that offers users the ability to adjust the speed according to the task at hand. This flexibility is crucial when working on different materials, as it allows for greater precision and improved results. The tool’s lightweight design, combined with its ergonomic shape, makes it easy to maneuver and ideal for overhead applications.

In summary, the Makita HR2811F is a top-tier rotary hammer drill that combines power, comfort, and versatility. With its strong motor, anti-vibration technology, and dust sealing system, it is perfectly suited for demanding tasks in construction and renovation. Whether you're drilling into concrete, brick, or rock, the HR2811F delivers exceptional performance that professionals and hobbyists alike can rely on.
Top Page Image Contents