Makita HR2810T, HR2800, HR2811FT instruction manual Maintenance, Accessories, Diamond core drilling

Page 9

2

1

 

 

 

 

3

4

007945

 

 

 

1

 

 

2

3

 

 

004224

 

 

1.Spindle

2.Quick change drill chuck

3.Change cover line

4.Change cover

1.Sleeve

2.Ring

3.Quick change drill chuck

•A stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly.

•Always secure small workpieces in a vise or similar hold-down device.

Diamond core drilling

When performing diamond core drilling operations,

always set the change lever to the position to use "rotation only" action.

CAUTION:

•If performing diamond core drilling operations using "rotation with hammering" action, the diamond core bit may be damaged.

MAINTENANCE

CAUTION:

For Model HR2800, HR28010, HR2810F

Use the optional drill chuck assembly. When installing it, refer to "Installing or removing the bit" described on the previous page.

Set the action mode changing knob so that the pointer points to the symbol.

For model HR2810T, HR2811FT

Use the quick change drill chuck as standard equipment. When installing it, refer to "changing the quick change chuck for SDS-plus " described on the previous page.

Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clockwise to tighten the chuck. To remove the bit, hold the ring and turn the sleeve counterclockwise.

Set the action mode changing knob to the symbol. You can drill up to 13 mm diameter in metal and up to 32 mm diameter in wood.

CAUTION:

•Never use "rotation with hammering" when the quick change drill chuck is installed on the tool. The quick change drill chuck may be damaged.

Also, the drill chuck will come off when reversing the tool.

•Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool.

•There is a tremendous twisting force exerted on the tool/bit at the time of hole breakthrough. Hold the tool firmly and exert care when the bit begins to break through the workpiece.

•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.

•Never use gasoline, benzine, thinner, alcohol or

the like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.

•SDS-Plus Carbide-tipped bits

•Bull point

•Core bit

•Cold chisel

•Diamond core bit

•Scaling chisel

•Grooving chisel

•Drill chuck assembly

•Drill chuck S13

•Chuck adapter

•Chuck key S13

•Bit grease

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Rotary Hammer Marteau Perforateur Martillo Rotativo English Original instructions SpecificationsRotary Hammer Safety Warnings Minimum gage for cord Ampere Rating Volts120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Functional Description Switch actionSelecting the action mode Reversing switch actionLighting up the lamps Changing the quick change chuck for SDS-plusTorque limiter AssemblySide grip auxiliary handle Bit greaseBit angle when chipping, scaling or demolishing Installing or removing the bitDepth gauge Dust cupOperation Blow-out bulb optional accessoryHammer drilling operation Chipping/Scaling/DemolitionAccessories MaintenanceDiamond core drilling For Model HR2800, HR28010, HR2810FWarranty Policy Makita Limited ONE Year WarrantyFrançais Mode d’emploi original SpécificationsSécurité personnelle Que celles prévues peut entraîner une situation dangereuse Consignes DE Sécurité Pour Marteau Rotatif Conservez CE Mode DemploiInterrupteur Allumage de la lampe Description DU FonctionnementInverseur Pour les modèles HR2811F et HR2811FTChanger le mandrin à adaptateur rapide pour SDS-plus Sélection du mode de fonctionnementAssemblage Installation et retrait du emboutPoignée latérale poignée auxiliaire Graisse roseGabarit de profondeur Collecteur de poussièresPour les modèles HR2810, HR2810T, HR2811F et HR2811FT Utilisation Poire soufflante accessoire en optionPerçage avec martelage Burinage / Ecaillage / DémolitionAccessoires EntretienPerforation au diamant Politique de garantie Garantie Limitée D’UN AN MakitaEspañol Instrucciones originales EspecificacionesPage Guarde Estas Instrucciones Advertencia DE Seguridad Para USO DEL Martillo RotativoMás de No más de Calibre del cable AWG 10 a 12 aAccionamiento del interruptor Encendido de la lámpara Descripción DEL FuncionamientoAccionamiento del conmutador de inversión de giro Para modelos HR2811F, HR2811FTSelección del modo de accionamiento Cambio del mandril de cambio rápido para SDS-plusEmpuñadura lateral auxiliar EnsambleLimitador de torsión Grasa para brocasÁngulo de cincel al cortar, demoler o tallar Calibrador de profundidadContenedor de polvo opcional Para modelos HR2810, HR2810T, HR2811F, HR2811FTOperación de taladrado con percusión OperaciónSoplador Accesorio opcional Cincelado/Tallado/DemoliciónAccesorios MantenimientoPerforación con corona diamantada Para modelos HR2800, HR28010, HR2810FPolítica de garantía Page Advertencia
Related manuals
Manual 3 pages 4.86 Kb

HR2811FT, HR2810, HR2800, HR2811F, HR2810T specifications

The Makita HR2811F is a powerful and efficient rotary hammer drill that’s designed for heavy-duty applications, making it a valuable tool for both professionals and DIY enthusiasts. This model stands out with its robust construction and advanced features that ensure maximum performance and durability.

One of the key features of the HR2811F is its powerful 800-watt motor, which delivers an impact energy of up to 2.9 Joules. This impressive power allows the drill to handle even the toughest materials, including concrete and masonry, with ease. The hammer drill is equipped with a dual-mode operation, allowing users to switch between hammering and rotary drilling, making it versatile for various tasks.

The HR2811F incorporates an advanced anti-vibration technology (AVT), which minimizes hand fatigue and enhances user comfort during prolonged use. This technology consists of a counterbalance system that absorbs vibrations, ensuring that the tool operates smoothly and efficiently. Additionally, the soft-grip handle provides added comfort, making it easier to handle while reducing the risk of slips.

Another notable characteristic of the Makita HR2811F is its optimized dust sealing system, which protects the internal components from dust and debris. This feature significantly enhances the tool's lifespan and reliability, especially when working in challenging environments. The drill is also designed for easy bit changes, with a quick-change chuck system that allows for the rapid exchange of SDS-plus bits.

The HR2811F is equipped with a variable speed control feature that offers users the ability to adjust the speed according to the task at hand. This flexibility is crucial when working on different materials, as it allows for greater precision and improved results. The tool’s lightweight design, combined with its ergonomic shape, makes it easy to maneuver and ideal for overhead applications.

In summary, the Makita HR2811F is a top-tier rotary hammer drill that combines power, comfort, and versatility. With its strong motor, anti-vibration technology, and dust sealing system, it is perfectly suited for demanding tasks in construction and renovation. Whether you're drilling into concrete, brick, or rock, the HR2811F delivers exceptional performance that professionals and hobbyists alike can rely on.
Top Page Image Contents