Makita HR2810T, HR2800, HR2811FT instruction manual Functional Description, Switch action

Page 4

highly recommended that you wear a dust mask and thickly padded gloves.

5.

Be sure the bit is secured in place before

 

operation.

6.

Under normal operation, the tool is designed

 

to produce vibration. The screws can come

 

loose easily, causing a breakdown or accident.

 

Check tightness of screws carefully before

 

operation.

7.

In cold weather or when the tool has not been

 

used for a long time, let the tool warm up for a

 

while by operating it under no load. This will

 

loosen up the lubrication. Without proper

 

warm-up, hammering operation is difficult.

8.

Always be sure you have a firm footing.

 

Be sure no one is below when using the tool in

 

high locations.

9.

Hold the tool firmly with both hands.

10.

Keep hands away from moving parts.

11.

Do not leave the tool running. Operate the tool

 

only when hand-held.

12.

Do not point the tool at any one in the area

 

when operating. The bit could fly out and

 

injure someone seriously.

13.

Do not touch the bit or parts close to the bit

 

immediately after operation; they may be

 

extremely hot and could burn your skin.

14.

Some material contains chemicals which may

 

be toxic. Take caution to prevent dust

USD202-2

Symbols

The followings show the symbols used for tool.

volts

amperes

hertz

alternating current

no load speed

Class II Construction

revolutions or reciprocation per minute

number of blow

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

Switch action

inhalation and skin contact. Follow material

supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this

1

008204

CAUTION:

1. Switch trigger

instruction manual may cause serious personal injury.

Before plugging in the tool, always check to see

that the switch trigger actuates properly and returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop.

4

Image 4
Contents Rotary Hammer Marteau Perforateur Martillo Rotativo Specifications English Original instructionsMinimum gage for cord Ampere Rating Volts Rotary Hammer Safety Warnings120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Switch action Functional DescriptionReversing switch action Selecting the action modeLighting up the lamps Changing the quick change chuck for SDS-plusAssembly Torque limiterSide grip auxiliary handle Bit greaseInstalling or removing the bit Bit angle when chipping, scaling or demolishingDepth gauge Dust cupBlow-out bulb optional accessory OperationHammer drilling operation Chipping/Scaling/DemolitionMaintenance AccessoriesDiamond core drilling For Model HR2800, HR28010, HR2810FMakita Limited ONE Year Warranty Warranty PolicySpécifications Français Mode d’emploi originalSécurité personnelle Que celles prévues peut entraîner une situation dangereuse Conservez CE Mode Demploi Consignes DE Sécurité Pour Marteau RotatifDescription DU Fonctionnement Interrupteur Allumage de la lampeInverseur Pour les modèles HR2811F et HR2811FTSélection du mode de fonctionnement Changer le mandrin à adaptateur rapide pour SDS-plusInstallation et retrait du embout AssemblagePoignée latérale poignée auxiliaire Graisse roseCollecteur de poussières Gabarit de profondeurPour les modèles HR2810, HR2810T, HR2811F et HR2811FT Poire soufflante accessoire en option UtilisationPerçage avec martelage Burinage / Ecaillage / DémolitionEntretien AccessoiresPerforation au diamant Garantie Limitée D’UN AN Makita Politique de garantieEspecificaciones Español Instrucciones originalesPage Advertencia DE Seguridad Para USO DEL Martillo Rotativo Guarde Estas InstruccionesMás de No más de Calibre del cable AWG 10 a 12 aDescripción DEL Funcionamiento Accionamiento del interruptor Encendido de la lámparaAccionamiento del conmutador de inversión de giro Para modelos HR2811F, HR2811FTCambio del mandril de cambio rápido para SDS-plus Selección del modo de accionamientoEnsamble Empuñadura lateral auxiliarLimitador de torsión Grasa para brocasCalibrador de profundidad Ángulo de cincel al cortar, demoler o tallarContenedor de polvo opcional Para modelos HR2810, HR2810T, HR2811F, HR2811FTOperación Operación de taladrado con percusiónSoplador Accesorio opcional Cincelado/Tallado/DemoliciónMantenimiento AccesoriosPerforación con corona diamantada Para modelos HR2800, HR28010, HR2810FPolítica de garantía Page Advertencia
Related manuals
Manual 3 pages 4.86 Kb

HR2811FT, HR2810, HR2800, HR2811F, HR2810T specifications

The Makita HR2811F is a powerful and efficient rotary hammer drill that’s designed for heavy-duty applications, making it a valuable tool for both professionals and DIY enthusiasts. This model stands out with its robust construction and advanced features that ensure maximum performance and durability.

One of the key features of the HR2811F is its powerful 800-watt motor, which delivers an impact energy of up to 2.9 Joules. This impressive power allows the drill to handle even the toughest materials, including concrete and masonry, with ease. The hammer drill is equipped with a dual-mode operation, allowing users to switch between hammering and rotary drilling, making it versatile for various tasks.

The HR2811F incorporates an advanced anti-vibration technology (AVT), which minimizes hand fatigue and enhances user comfort during prolonged use. This technology consists of a counterbalance system that absorbs vibrations, ensuring that the tool operates smoothly and efficiently. Additionally, the soft-grip handle provides added comfort, making it easier to handle while reducing the risk of slips.

Another notable characteristic of the Makita HR2811F is its optimized dust sealing system, which protects the internal components from dust and debris. This feature significantly enhances the tool's lifespan and reliability, especially when working in challenging environments. The drill is also designed for easy bit changes, with a quick-change chuck system that allows for the rapid exchange of SDS-plus bits.

The HR2811F is equipped with a variable speed control feature that offers users the ability to adjust the speed according to the task at hand. This flexibility is crucial when working on different materials, as it allows for greater precision and improved results. The tool’s lightweight design, combined with its ergonomic shape, makes it easy to maneuver and ideal for overhead applications.

In summary, the Makita HR2811F is a top-tier rotary hammer drill that combines power, comfort, and versatility. With its strong motor, anti-vibration technology, and dust sealing system, it is perfectly suited for demanding tasks in construction and renovation. Whether you're drilling into concrete, brick, or rock, the HR2811F delivers exceptional performance that professionals and hobbyists alike can rely on.